HP-ICF-SYSLOG-MIB DEFINITIONS ::= BEGIN IMPORTS hpicfSyslog FROM HP-ICF-OID MODULE-IDENTITY, OBJECT-TYPE, Counter32, Integer32, NOTIFICATION-TYPE FROM SNMPv2-SMI RowStatus, TEXTUAL-CONVENTION, TimeStamp, TruthValue FROM SNMPv2-TC InetAddressType, InetAddress FROM INET-ADDRESS-MIB MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF SnmpAdminString FROM SNMP-FRAMEWORK-MIB; hpicfSyslogMIB MODULE-IDENTITY LAST-UPDATED "200902180000Z" -- February 18, 2009 ORGANIZATION "Hewlett Packard Company, Procurve Networking Business" CONTACT-INFO "Hewlett-Packard Company 8000 Foothills Blvd. Roseville, CA 95747" DESCRIPTION "The MIB module for configuring and monitoring syslog applications. The Procurve syslog application sends syslog messages." REVISION "200902180000Z" -- February 18, 2009 DESCRIPTION "Added 'hpicfSyslogControlBindAddrIsOobm' MIB object to 'hpicfSyslogControlTable'. Add an enum for oobm in ''HpicfSyslogSystemModule'. " REVISION "200811180000Z" -- November 18, 2008 DESCRIPTION "Add 'srcip' to the available SYNTAX for HpicfSyslogSystemModule. " REVISION "200807090000Z" -- July 9, 2008 DESCRIPTION "Add 'hpsm' to the available SYNTAX for HpicfSyslogSystemModule. " REVISION "200806260000Z" -- June 26, 2008 DESCRIPTION "Add 'dipld' to the available SYNTAX for HpicfSyslogSystemModule. " REVISION "200806250000Z" -- June 25, 2008 DESCRIPTION "Correct comments that are not clear or written properly. " REVISION "200801250000Z" -- April 25, 2008 DESCRIPTION "Add 'bridge' to the available SYNTAX for HpicfSyslogSystemModule. " REVISION "200801011121Z" -- January 1, 2008 DESCRIPTION "The initial version." ::= { hpicfSyslog 1 } -- ------------------------------------------------------------- -- Textual Conventions -- ------------------------------------------------------------- HpicfSyslogFacility ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This textual convention enumerates the facility of a syslog application. " SYNTAX INTEGER { kern (0), user (1), mail (2), daemon (3), auth (4), syslog (5), lpr (6), news (7), uucp (8), sys9 (9), sys10 (10), sys11 (11), sys12 (12), sys13 (13), sys14 (14), cron (15), local0 (16), local1 (17), local2 (18), local3 (19), local4 (20), local5 (21), local6 (22), local7 (23) } HpicfSyslogSeverity ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This textual convention enumerates the severity of a syslog application. " SYNTAX INTEGER { major (0), error (3), warning (4), info (6), debug (7) } HpicfSyslogSystemModule ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This textual convention enumerates the system module (subsystem) of a syslog application. " SYNTAX INTEGER { all-pass (0), vlan (1), ip (2), igmp (3), ipx (4), stp (5), system (6), chassis (7), console (8), ports (9), dhcp (10), download (11), tcp (12), telnet (13), timep (14), tftp (15), xmodem (16), update (17), mgr (18), bridge (19), snmp (20), addrmgr (21), agp (22), fault (23), ldbal (24), garp (25), gvrp (26), cos (27), lacp (28), dhcpr (29), stack (30), dma (31), sntp (32), ieee8021x (33), cdp (34), auth (35), tacacs (36), radius (37), ssh (38), netinet (39), ospf (40), xrrp (41), ssl (42), ipaddrmgr (43), macauth (44), kms (45), pim (46), maclock (47), acl (48), udpf (49), inst-mon (50), udld (51), hpesp (52), lldp (53), connfilt (54), ratelim (55), idm (56), iplock (57), dhcp-snoop (58), vrrp (59), usb (60), licensing (61), loop-protect (62), sflow (63), arp-protect (64), dhcpv6c (65), mtm (66), mld (67), dca (68), qinq (69), autorun (70), ffi (71), wsm (72), dipld (73), hpsm (74), srcip (75), policy (76), oobm (77) } -- hpicfSyslogMIB - the main groups -- ------------------------------------------------------------- hpicfSyslogNotifications OBJECT IDENTIFIER ::= { hpicfSyslogMIB 0 } hpicfSyslogObjects OBJECT IDENTIFIER ::= { hpicfSyslogMIB 1 } hpicfSyslogConformance OBJECT IDENTIFIER ::= { hpicfSyslogMIB 3 } -- ------------------------------------------------------------- -- syslog application configuration info table -- ------------------------------------------------------------- hpicfSyslogControlTable OBJECT-TYPE SYNTAX SEQUENCE OF HpicfSyslogControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing the configuration parameters pertaining to the hpicfSyslog applications serviced by an SNMP agent. " ::= { hpicfSyslogObjects 1 } hpicfSyslogControlEntry OBJECT-TYPE SYNTAX HpicfSyslogControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The configuration parameters pertaining to a syslog application. " INDEX { hpicfSyslogControlIndex } ::= { hpicfSyslogControlTable 1 } HpicfSyslogControlEntry ::= SEQUENCE { hpicfSyslogControlIndex Integer32, hpicfSyslogControlDescr SnmpAdminString, hpicfSyslogControlBindAddrType InetAddressType, hpicfSyslogControlBindAddr InetAddress, hpicfSyslogControlRowStatus RowStatus, hpicfSyslogControlBindAddrIsOobm TruthValue } hpicfSyslogControlIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Index that uniquely identifies the syslog application in the hpicfSyslogControlTable. The value of the index for a syslog application may not be the same across system reboots. Users and applications will need to determine the index of a syslog application after system reboots. Initial implementation allows integers (1..6). " ::= { hpicfSyslogControlEntry 1 } hpicfSyslogControlDescr OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "A user definable description of the syslog application. This description could be used by syslog management applications e.g. in reports or in user interfaces. For the description to be persistent across reboots, the conceptual row must be in the 'active' state. Also, refer to note in hpicfSyslogControlRowStatus, for additional limitations. " ::= { hpicfSyslogControlEntry 2 } hpicfSyslogControlBindAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of Internet address which follows in hpicfSyslogControlBindAddr. Currently only IPv4 is supported. " ::= { hpicfSyslogControlEntry 3 } hpicfSyslogControlBindAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The specific address the syslog sender will bind to. The format of the address is specified by the corresponding hpicfSyslogControlBindAddrType object. " ::= { hpicfSyslogControlEntry 4 } hpicfSyslogControlRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to create, modify and delete rows in the hpicfSyslogControlTable. The value of hpicfSyslogControlDescr can be changed when this object is in state ''active'' or in ''notInService''. The other objects in a row can be modified only when the value of this object in the corresponding conceptual row is not ''active''. Thus to modify one or more of the objects in this conceptual row, a. change the row status to ''notInService'', b. change the values of the row c. change the row status to ''active'' The hpicfSyslogControlRowStatus may be changed to ''active'' if all the managed objects in the conceptual row with MAX-ACCESS read-create have been assigned valid values. The information in each conceptual row is only persist across reboots if the row status is 'active'. " ::= { hpicfSyslogControlEntry 5 } hpicfSyslogControlBindAddrIsOobm OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the specific address to which syslog sender will bind is on OOBM interface. This mib object will be applicable only if there is a physical OOBM port on the device. " DEFVAL {false} ::= { hpicfSyslogControlEntry 6 } -- ------------------------------------------------------------- -- hpicfSyslogOperations -- ------------------------------------------------------------- hpicfSyslogOperations OBJECT IDENTIFIER ::= { hpicfSyslogObjects 2 } hpicfSyslogOperationsMsgsTransmitted OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of messages transmitted by the syslog sender. This does not include the messages that could not be queued for transmission by the hpicfSyslog sender. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of hpicfSyslogOperationsCounterDiscontinuityTime. " ::= { hpicfSyslogOperations 1 } hpicfSyslogOperationsMsgsDropped OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of messages that could not be queued for transmission by the syslog sender. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of hpicfSyslogOperationsCounterDiscontinuityTime. " ::= { hpicfSyslogOperations 2 } hpicfSyslogOperationsLastMsgTransmittedTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when the last message was transmitted by the hpicfSyslog sender. If no messages have been transmitted by this syslog application, since the last re-initialization of the local management subsystem, then this object will have a zero value. " ::= { hpicfSyslogOperations 3 } hpicfSyslogOperationsStartTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when this syslog application was started. " ::= { hpicfSyslogOperations 4 } hpicfSyslogOperationsLastError OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "A description of the last error related to sending a syslog message that was encountered by this syslog application. If no error has been encountered by this syslog application then the value of this object will be a zero-length string. If no error has been encountered by this syslog application since the last re-initialization of the local management subsystem then the value of this object will be a zero-length string. " ::= { hpicfSyslogOperations 5 } hpicfSyslogOperationsLastErrorTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when the last error was encountered. If no error has been encountered by this syslog application since the last re-initialization of the local management subsystem, then this object will have a zero value. " ::= { hpicfSyslogOperations 6 } hpicfSyslogOperationsCounterDiscontinuityTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime on the most recent occasion at which any one or more of this syslog application's counters, viz., counters with OID prefix 'hpicfSyslogOperationsMsgsTransmitted' or 'hpicfSyslogOperationsMsgsDropped' suffered a discontinuity. If no such discontinuities have occurred since the last re-initialization of the local management subsystem, then this object will have a zero value. " ::= { hpicfSyslogOperations 7 } hpicfSyslogOperationsStatus OBJECT-TYPE SYNTAX INTEGER { unknown (1), started (2), suspended(3), stopped (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the syslog application. " DEFVAL { unknown } ::= { hpicfSyslogOperations 8 } -- ------------------------------------------------------------- -- hpicfSyslogPriority -- ------------------------------------------------------------- hpicfSyslogPriority OBJECT IDENTIFIER ::= { hpicfSyslogObjects 3 } hpicfSyslogPriorityFacility OBJECT-TYPE SYNTAX HpicfSyslogFacility MAX-ACCESS read-write STATUS current DESCRIPTION "The facility value of this entry. This value will be returned in all syslog message, regardless of the process/daemon that originates the message. " DEFVAL { user } ::= { hpicfSyslogPriority 1 } hpicfSyslogPrioritySeverity OBJECT-TYPE SYNTAX HpicfSyslogSeverity MAX-ACCESS read-write STATUS current DESCRIPTION "The severity value of this entry. Used to filter 'event' messages. " DEFVAL { debug } ::= { hpicfSyslogPriority 2 } hpicfSyslogPriorityDescr OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "A textual description of this priority entry. " ::= { hpicfSyslogPriority 3 } hpicfSyslogSystemModule OBJECT-TYPE SYNTAX HpicfSyslogSystemModule MAX-ACCESS read-write STATUS current DESCRIPTION "A system module value of this entry. Used to filter 'event' messages. " DEFVAL { all-pass } ::= { hpicfSyslogPriority 4 } -- ------------------------------------------------------------- -- Notification Information -- ------------------------------------------------------------- hpicfSyslogStatusChanged NOTIFICATION-TYPE OBJECTS { hpicfSyslogControlIndex, hpicfSyslogControlDescr, hpicfSyslogControlBindAddrType, hpicfSyslogControlBindAddr, hpicfSyslogControlRowStatus, hpicfSyslogPriorityDescr, hpicfSyslogPrioritySeverity, hpicfSyslogPriorityFacility, hpicfSyslogSystemModule, hpicfSyslogOperationsStatus } STATUS current DESCRIPTION "This notification is sent when any of the objects listed are accessed. For example, when the first server address is entered, the application starts [hpicfSyslogOperationsStatus is ''started'' ]. When the last server address is removed, the syslog application stops [hpicfSyslogOperationsStatus is ''stopped'']. The value of hpicfSyslogOperationsStatus will be the new status of the syslog application after the change. Another example, when a server address is added, a notification is sent indicating the index used to store the row information, as well as the address type, the address itself, the description if given , and the row status. " ::= { hpicfSyslogNotifications 1 } -- ------------------------------------------------------------- -- Conformance Information -- ------------------------------------------------------------- hpicfSyslogGroups OBJECT IDENTIFIER ::= { hpicfSyslogConformance 1 } hpicfSyslogCompliances OBJECT IDENTIFIER ::= { hpicfSyslogConformance 2 } -- ------------------------------------------------------------- -- units of conformance -- ------------------------------------------------------------- hpicfSyslogOperationsGroup OBJECT-GROUP OBJECTS { hpicfSyslogOperationsMsgsTransmitted, hpicfSyslogOperationsMsgsDropped, hpicfSyslogOperationsLastMsgTransmittedTime, hpicfSyslogOperationsStartTime, hpicfSyslogOperationsLastError, hpicfSyslogOperationsLastErrorTime, hpicfSyslogOperationsCounterDiscontinuityTime, hpicfSyslogOperationsStatus } STATUS current DESCRIPTION "A collection of objects providing message related statistics." ::= { hpicfSyslogGroups 1} hpicfSyslogControlGroup OBJECT-GROUP OBJECTS { hpicfSyslogControlDescr, hpicfSyslogControlBindAddrType, hpicfSyslogControlBindAddr, hpicfSyslogControlRowStatus } STATUS current DESCRIPTION "A collection of objects representing the run time parameters for the syslog applications. " ::= { hpicfSyslogGroups 2} hpicfSyslogPriorityGroup OBJECT-GROUP OBJECTS { hpicfSyslogPriorityDescr } STATUS current DESCRIPTION "A collection of objects representing the priority groupings of hpicfSyslog messages. " ::= { hpicfSyslogGroups 3} hpicfSyslogNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { hpicfSyslogStatusChanged } STATUS current DESCRIPTION "A collection of notifications about the operational state of a syslog application. " ::= { hpicfSyslogGroups 5} hpicfSyslogControlGroupOobm OBJECT-GROUP OBJECTS { hpicfSyslogControlBindAddr, hpicfSyslogControlBindAddrIsOobm } STATUS current DESCRIPTION "A collection of objects representing the run time parameters for the OOBM aware syslog applications. " ::= { hpicfSyslogGroups 6} -- ------------------------------------------------------------- -- compliance statements -- ------------------------------------------------------------- hpicfSyslogFullCompliance1 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMP entities which implement the SYSLOG-MIB with support for writable objects and notifications. Such an implementation can be both monitored and configured via SNMP. It can also send notifications about change in the operational status of the syslog application. " MODULE -- this module MANDATORY-GROUPS { hpicfSyslogNotificationGroup, hpicfSyslogOperationsGroup, hpicfSyslogControlGroup, hpicfSyslogPriorityGroup } ::= { hpicfSyslogCompliances 1 } hpicfSyslogFullCompliance2 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMP entities which implement the SYSLOG-MIB with support for writable objects. Such an implementation can be both monitored and configured via SNMP. " MODULE -- this module MANDATORY-GROUPS { hpicfSyslogOperationsGroup, hpicfSyslogControlGroup, hpicfSyslogPriorityGroup } ::= { hpicfSyslogCompliances 2 } hpicfSyslogReadOnlyCompliance1 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMP entities which implement the hpicfSyslog MIB without support for read-write (i.e. in read-only mode). It can also send notifications about change in the operational status of the syslog application. " MODULE -- this module MANDATORY-GROUPS { hpicfSyslogNotificationGroup, hpicfSyslogOperationsGroup, hpicfSyslogControlGroup, hpicfSyslogPriorityGroup } OBJECT hpicfSyslogControlDescr MIN-ACCESS read-only DESCRIPTION "Write access is not required. " OBJECT hpicfSyslogControlBindAddrType MIN-ACCESS read-only DESCRIPTION "Write access is not required. " OBJECT hpicfSyslogControlBindAddr MIN-ACCESS read-only DESCRIPTION "Write access is not required. " OBJECT hpicfSyslogControlRowStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required. " ::= { hpicfSyslogCompliances 4 } hpicfSyslogReadOnlyCompliance2 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMP entities which implement the hpicfSyslog MIB without support for read-write (i.e. in read-only mode). " MODULE -- this module MANDATORY-GROUPS { hpicfSyslogOperationsGroup, hpicfSyslogControlGroup, hpicfSyslogPriorityGroup } OBJECT hpicfSyslogControlDescr MIN-ACCESS read-only DESCRIPTION "Write access is not required. " OBJECT hpicfSyslogControlBindAddrType MIN-ACCESS read-only DESCRIPTION "Write access is not required. " OBJECT hpicfSyslogControlBindAddr MIN-ACCESS read-only DESCRIPTION "Write access is not required. " OBJECT hpicfSyslogControlRowStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required. " OBJECT hpicfSyslogPriorityDescr MIN-ACCESS read-only DESCRIPTION "Write access is not required. " OBJECT hpicfSyslogPriorityDestinationIndex MIN-ACCESS read-only DESCRIPTION "Write access is not required. " ::= { hpicfSyslogCompliances 5 } hpicfSyslogNotificationCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMP entities which implement the SYSLOG-MIB and support only notifications about change in the operational status of a syslog application. " MODULE -- this module MANDATORY-GROUPS { hpicfSyslogNotificationGroup } ::= { hpicfSyslogCompliances 7 } hpicfSyslogFullComplianceOobm MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for syslog server configuration with support for OOBM. " MODULE -- this module GROUP hpicfSyslogControlGroupOobm DESCRIPTION "This group is optional if there is no OOBM port on device." ::= { hpicfSyslogCompliances 8 } END