<![CDATA[Complex container status]]>Hi again!

My network provider supplies me a main 100 Mbs bandwith line (A) and a backup 10 Mbs bandwith line (B) for a given location.  I need status container follow:

A status		Up	Up	Down	Down
B status		Up	Down	Up	Down
Location status		Normal	Normal	Minor	Major

I have created a condition under same container of A and B, with next condition script:

//trace(0,$1);
//trace(0,$2);
if ($1>0){
	if ($2>0)
		return 3;	//Return MAJOR
	else
		return 2;	// return MINOR
	}
return 0;			// return NORMAL
// blank last line is required for elude:
// syntax error, unexpected '/', expecting $end

Please, is there any way to change condition active state defined in General tab, from inside script?
Please, is there another way to get needed states?

Thanks in advance.

]]>https://forum.netxms.org/topic/1151/complex-container-statusRSS for NodeFri, 13 Nov 2026 10:40:34 GMTWed, 23 Feb 2011 13:29:02 GMT60<![CDATA[Reply to Complex container status on Tue, 01 Mar 2011 12:46:39 GMT]]>Hi Victor,

Of course, by using two or more conditions!. I would have never come to mind :-[.

Now, desired container status work fine.

Thank you very much again.

]]>https://forum.netxms.org/post/5224https://forum.netxms.org/post/5224Tue, 01 Mar 2011 12:46:39 GMT<![CDATA[Reply to Complex container status on Fri, 25 Feb 2011 12:15:16 GMT]]>Hi!

Condition can have only two statuses - when it is active and when it is not active. Condition script expected to return true or false - if it returns true, condition considered as "active", and it's status changed appropriately.

For your case, I see the following solution (not very elegant though):

  1. On nodes A and B, set status propagation to fixed value "Normal" - this will ensure that they will not change status of parent location directly;
  2. Create 2 conditions in same location, each having DCI Status for node A and node B as data (A Status first).
  3. For condition 1, set active status to "Minor" and inactive to "Normal", and use the following script:

($1 == 4) && ($2 == 0)

  1. For condition 1, set active status to "Major" and inactive to "Normal", and use the following script:

($1 == 4) && ($2 == 4)

Should work 🙂

Best regards,
Victor

]]>https://forum.netxms.org/post/5194https://forum.netxms.org/post/5194Fri, 25 Feb 2011 12:15:16 GMT<![CDATA[Reply to Complex container status on Thu, 24 Feb 2011 11:44:30 GMT]]>Hi.

A and B are routers nodes.
"Location" is a container for A and B nodes: the city where they are located.

Next table show status for "Location" container, based in A and B nodes statuses:

[tr][td]If node A change to   Normal Normal Critical Critical
If node B change to   Normal Critical Normal Critical
Location status must be    Normal    Normal    Minor          Major

.

However, I believe that a condition should be able to change his status to the same status returned from his own script.

Best regards.

]]>https://forum.netxms.org/post/5188https://forum.netxms.org/post/5188Thu, 24 Feb 2011 11:44:30 GMT<![CDATA[Reply to Complex container status on Thu, 24 Feb 2011 10:06:24 GMT]]>Hi!

What is A, B, and "Location" - containers? If you need to calculate status of Location based on statuses of subcontainers A and B, the beset way is to use status calculation/propagation rules. If this is the case, tell me what statuses could have A and B, and I'll try to create rules for your requirement.

Best regards,
Victor

]]>https://forum.netxms.org/post/5186https://forum.netxms.org/post/5186Thu, 24 Feb 2011 10:06:24 GMT