<![CDATA[auto map]]>Hi
i am using version 1.2.4, i discovered many snmp switches but when i tried to create auto map and selected the seed node nothing was done, it only display the seed node, what's the problem ?
other point, in some switches i got the switches doesn't support layer2 discovery, who Netxms know if the switch have this feature or not ?
in the case of cascade port in the switch the console only display one MAC address, are there any way to tell the console that this is cascade port and can have many MAC that it have to display them ?
best regards

]]>https://forum.netxms.org/topic/2058/auto-mapRSS for NodeFri, 13 Nov 2026 11:19:21 GMTSat, 08 Dec 2012 09:56:55 GMT60<![CDATA[Reply to auto map on Sun, 09 Dec 2012 18:01:50 GMT]]>Ok thanks,
when i try to do layer2 topology for each switch i get the schema for almost of them, but i have problem with the cascade ports, in fact the schema show on pcs in the second switch as node connected to this port, are there way to configure port as casacde ?

]]>https://forum.netxms.org/post/9075https://forum.netxms.org/post/9075Sun, 09 Dec 2012 18:01:50 GMT<![CDATA[Reply to auto map on Sat, 08 Dec 2012 14:22:30 GMT]]>@user16632 said in auto map:

(trendent) TGE-240WS and SMC8612XL3 (SMC) and DES-6500 (DLINK).
please also how to configure switch port as cascade (not trunk) so the console display all the MAC addresses for this port.
thx

seems TGE-240WS, DES-6500 and SMC8612XL3 does not support any auto discovery protocols.
i can't find it in their specs.
Create your maps manually.

]]>https://forum.netxms.org/post/9074https://forum.netxms.org/post/9074Sat, 08 Dec 2012 14:22:30 GMT<![CDATA[Reply to auto map on Sat, 08 Dec 2012 13:51:52 GMT]]>(trendent) TGE-240WS and SMC8612XL3 (SMC) and DES-6500 (DLINK).
please also how to configure switch port as cascade (not trunk) so the console display all the MAC addresses for this port.
thx

]]>https://forum.netxms.org/post/9073https://forum.netxms.org/post/9073Sat, 08 Dec 2012 13:51:52 GMT<![CDATA[Reply to auto map on Sat, 08 Dec 2012 13:30:10 GMT]]>@user16632 said in auto map:

I am using DLINK and TRENDENT switch, i didn't find any configuration for LLDP !


models?

]]>https://forum.netxms.org/post/9072https://forum.netxms.org/post/9072Sat, 08 Dec 2012 13:30:10 GMT<![CDATA[Reply to auto map on Sat, 08 Dec 2012 12:05:19 GMT]]>I am using DLINK and TRENDENT switch, i didn't find any configuration for LLDP !

]]>https://forum.netxms.org/post/9071https://forum.netxms.org/post/9071Sat, 08 Dec 2012 12:05:19 GMT<![CDATA[Reply to auto map on Sat, 08 Dec 2012 11:02:34 GMT]]>@user16632 said in auto map:

Hi
i am using version 1.2.4, i discovered many snmp switches but when i tried to create auto map and selected the seed node nothing was done, it only display the seed node, what's the problem ?
other point, in some switches i got the switches doesn't support layer2 discovery, who Netxms know if the switch have this feature or not ?
in the case of cascade port in the switch the console only display one MAC address, are there any way to tell the console that this is cascade port and can have many MAC that it have to display them ?
best regards

enable any discovery protocol. CDP or LLDP.

]]>https://forum.netxms.org/post/9070https://forum.netxms.org/post/9070Sat, 08 Dec 2012 11:02:34 GMT