<![CDATA[Not able to configure DCI TABLE in new version]]>Hello,

I want to user <<TABLE>> in data collection for radius accounting but it is showing error unsupported.
how to use it?

Regards,
Dushyant Dave

]]>https://forum.netxms.org/topic/2253/not-able-to-configure-dci-table-in-new-versionRSS for NodeFri, 13 Nov 2026 12:18:04 GMTSat, 16 Mar 2013 09:20:48 GMT60<![CDATA[Reply to Not able to configure DCI TABLE in new version on Tue, 26 Mar 2013 08:34:59 GMT]]>Hello Joos68,

I have updated my snmpd.conf as mentioned but still I am getting DCI changed to UNSUPPORTED.
I have attached screenshot of radius mid tree, please guide me which tree I have to select for DCI Table
and I am using version 1.2.6 is it ok?

netxms.JPG

]]>https://forum.netxms.org/post/9997https://forum.netxms.org/post/9997Tue, 26 Mar 2013 08:34:59 GMT<![CDATA[Reply to Not able to configure DCI TABLE in new version on Thu, 21 Mar 2013 15:30:51 GMT]]>Hi,
I think you mixed up some thinks in your configuration.
You test the access with snmpwalk directly on the machine and uses the community "public" and port 1161.
But in your posted snmpd.conf there is not such a community (I guess it's the conf from your radius server).
Also I miss the mapping of the community name (COMMUNITY) into a security name.

Example:
# sec.name source community
com2sec local    localhost      public
com2sec mynetwork 10.1.1.0/28          public

After that you normally map the security names into group names:
# sec.model  sec.name
group MyRWGroup        v1        local
group MyRWGroup        v2c      local
group MyRWGroup        usm      local
group MyROGroup v1        mynetwork
group MyROGroup v2c        mynetwork
group MyROGroup usm        mynetwork

Then you create a view or views like:
# incl/excl subtree
view all  included .1
view  sysView included    system

And finally you grant the groups access to the views with different write permissions:
# context sec.model sec.level match read  write notif
access MyROGroup ""      any      noauth    exact system    none  none
access MyRWGroup ""      any      noauth    exact all    all  none

I would suggest that you adjust your smnpd.conf accordingly.

]]>https://forum.netxms.org/post/9983https://forum.netxms.org/post/9983Thu, 21 Mar 2013 15:30:51 GMT<![CDATA[Reply to Not able to configure DCI TABLE in new version on Thu, 21 Mar 2013 12:05:34 GMT]]>isSNMP is showing yes, please find the error screenshot.
I am using RHEL 5.3 32bit

issnmp.JPG

error.JPG

]]>https://forum.netxms.org/post/9981https://forum.netxms.org/post/9981Thu, 21 Mar 2013 12:05:34 GMT<![CDATA[Reply to Not able to configure DCI TABLE in new version on Thu, 21 Mar 2013 08:48:48 GMT]]>You will find the node capabilities on the right side when you select the overview at opject details

I attached a screenshot where I marked it.

One more question: What OS are you running?

Object_Overview.JPG

]]>https://forum.netxms.org/post/9969https://forum.netxms.org/post/9969Thu, 21 Mar 2013 08:48:48 GMT<![CDATA[Reply to Not able to configure DCI TABLE in new version on Wed, 20 Mar 2013 11:52:07 GMT]]>my snmpd configuration is as below:

trapcommunity public
group    MyRWGroup    v1          local
group    MyRWGroup    v2c          local
group    MyROGroup    v1          mynetwork
group    MyROGroup    v2c          mynetwork
view all    included  .1                              80
access MyROGroup    ""        any        noauth      exact    all    none    none
access MyRWGroup    ""        any        noauth      exact    all    all    none

also find attached scrrenshot , I didn't found any issnmp option in the node.

AnyCap1.jpg

AnyCap2.jpg

]]>https://forum.netxms.org/post/9961https://forum.netxms.org/post/9961Wed, 20 Mar 2013 11:52:07 GMT<![CDATA[Reply to Not able to configure DCI TABLE in new version on Mon, 18 Mar 2013 19:46:08 GMT]]>Do you have SNMP settings set correctly on the node? Does node has "isSNMP" set to yes in capabilities?

Best regards,
Victor

]]>https://forum.netxms.org/post/9944https://forum.netxms.org/post/9944Mon, 18 Mar 2013 19:46:08 GMT<![CDATA[Reply to Not able to configure DCI TABLE in new version on Mon, 18 Mar 2013 13:42:00 GMT]]>Dear Jorg,

I want snmpwalk result in NetXMS Table
My radius server SNMP service is working on 1161 port
I am able to do snmpwalk -v1 -cpublic 10.106.1.254:1161 .1.3.6.1.2.1.67.1.1.1.1.15.1
I want all the  radiusAuthClientEntry - .1.3.6.1.2.1.67.1.1.1.1.15.1 tree
in the NetXMS Table

but it is showing unsupported.
please help.

Thanks & Regards,
Dushyant Dave

]]>https://forum.netxms.org/post/9937https://forum.netxms.org/post/9937Mon, 18 Mar 2013 13:42:00 GMT<![CDATA[Reply to Not able to configure DCI TABLE in new version on Mon, 18 Mar 2013 07:38:35 GMT]]>Hi,
your request is quite poor.
What exactly do you want to read via SNMP?
What a radius server you are talking to?
Have you ever tried the data through the MIB browser to read?

Best regards,
Jörg

]]>https://forum.netxms.org/post/9935https://forum.netxms.org/post/9935Mon, 18 Mar 2013 07:38:35 GMT<![CDATA[Reply to Not able to configure DCI TABLE in new version on Sat, 16 Mar 2013 09:43:59 GMT]]>I am using version 1.2.6
and in DCI TABLE using accounting server .1.3.6.1.2.1.67.2.1.1.1

]]>https://forum.netxms.org/post/9932https://forum.netxms.org/post/9932Sat, 16 Mar 2013 09:43:59 GMT