<![CDATA[1.2.10 Network Discovery]]>I installed it yesterday and let it run over night. Entire network didn't get many of the machines that are pingable from the host server's location.

I went into Configuration > Network Discovery and added all the vLANs I wanted it to check then turned off the "NetXMS Core" service when it wouldn't start poling the machines. I waited over an hour and it didn't add any machines out of the 10.2.x.x vLAN.

So I added 7 "seed" nodes in the vLANs I wanted it to discover.(That are also within the network discovery tab IP range) It still has not added any more machines within those vLANs after almost 2 hours. I verified that other machines on those vLANs can be pinged from the NetXMS server as well.

What am I missing here?

]]>https://forum.netxms.org/topic/2820/1.2.10-network-discoveryRSS for NodeFri, 13 Nov 2026 15:21:34 GMTThu, 26 Dec 2013 17:05:33 GMT60<![CDATA[Reply to 1.2.10 Network Discovery on Tue, 31 Dec 2013 12:14:08 GMT]]>I already had active turned on and the subnets input, but that's not getting the IP addresses to show up. That's why I was hoping for something like an IP scanner so I could put a range in rather than individually. But I guess that's what the "active" part of the network discovery is suppose to do. Anyway, here is your SS.

Network Discovery.jpg

]]>https://forum.netxms.org/post/12372https://forum.netxms.org/post/12372Tue, 31 Dec 2013 12:14:08 GMT<![CDATA[Reply to 1.2.10 Network Discovery on Mon, 30 Dec 2013 19:51:15 GMT]]>Hi!

You can turn on "active discovery" in network discovery configuration and add subnets you want to scan into "active discovery target" list. Regarding non-working discovery in first post - can you please share screenshot of your network discovery configuration?

Best regards,
Victor

]]>https://forum.netxms.org/post/12363https://forum.netxms.org/post/12363Mon, 30 Dec 2013 19:51:15 GMT<![CDATA[Reply to 1.2.10 Network Discovery on Mon, 30 Dec 2013 19:20:47 GMT]]>Is there some way to do a IP Scan and then add any machines found in that scan to NetXMS? (Or am I trying to re-invent the wheel here...) I just don't want to manually add all the devices.

]]>https://forum.netxms.org/post/12360https://forum.netxms.org/post/12360Mon, 30 Dec 2013 19:20:47 GMT