for those that have not - you do not know what you are missing.

I currently have 4 Alarm viewers (including NetXMS).

Two have no customising - this includes NetXMS

One has basic column selection but no column ordering - frustrating.

One has everything - absolutely everything. Column section, column ordering, preset filtering, severity filtering, separate settings for Alarms, Events, Explorer(Tree), Interfaces.
The preference setting screen is attached - see for yourself!!.

So why go NetXMS if I have the above? - the other product's DCI equivalent monitoring is appalling and as I can display NETXMS alarms per container and filter in "Outstanding" - I have a minimum workable solution with NetXMS.

1. I don't think you can store preset filters, nor can you select to only show some columns.
2. There is an "Export all to CSV" icon in the top right corner for logs (i.e. not in the Alarm Browser, but the Alarm Log).

The original post is from 2014 and the link Victor posted for the feature request no longer works, as the bugtracker system was switched in between.
However, I believe this is the new link for this request (i.e. it's still open): https://track.radensolutions.com/issue/NX-357
Note that the original request was about the Alarm Dashboard, not the Alarm or Event Logs.
There is another request for those two here: https://track.radensolutions.com/issue/NX-1052

You may want to add a comment to the above with your suggestions and/or requirements.

Cheers

ie. ONLY SELECTED COLUMNS  and Filtering conditions (Condition and Ordering) in Alarm log and Event log should be customized and stored as prefilters and when executed, display those details only... (of course, this can be done by selecting the node and clicking Event log/ Alarm log for that node, but I would like to do it in Event log and Alarm log with prefilters listed in and executing those preset filters to list only few selected columns and filtered conditions and preset order like...)

[sample for  Event logs:)
PresetName: Node1
Columns: ID, Time, Source, Severity, Message
Condition1: 'Source' IS Node1
Filter1: 'Time' reverse sorted

ID  Time                      Source Severity Message
xxx dd:mm:yy hh:mm:ss Node1  Critical  Node down
xxx dd:mm:yy hh:mm:ss Node1  Normal  Node up

PresetName: Rack1
Columns: ID, Time, Source, Event, Severity, Message
Condition1: 'Source' IS Node99 or 'Source' IS Server1 or 'Source' IS Server3
Condition2: 'Severity' IS Critical or 'Severity' IS Major
Filter1: 'Time' reverse sorted
Filter2: 'Severity' sorted

ID  Time                      Source Severity Message
xxx dd:mm:yy hh:mm:ss Node99  Critical  mmm
xxx dd:mm:yy hh:mm:ss Server3  Critical  mmm
xxx dd:mm:yy hh:mm:ss Server3  Critical  mmm
xxx dd:mm:yy hh:mm:ss Server1  Critical  mmm
xxx dd:mm:yy hh:mm:ss Node99  Major    mmm
xxx dd:mm:yy hh:mm:ss Node99  Critical  mmm
xxx dd:mm:yy hh:mm:ss Server3  Major    mmm

Has it been done??? Or if available, how to do it ???

2] Is there anyway to get this report exported to Excel or PDF format file???

--------------------
rojaRAJU, O+
==========