<![CDATA[SNMP table shows only blank fields]]>I would like to collect the Environment Table from a Cisco Switch, but nothing happens. The table under last results displays only blank fields. For example i have configure the temperature sensor from a Cisco Catalyst 2960-S.
Could someone help me to configuring the snmp table correctly?

properties.png

column definition.png

Select MIB Object.png

MIB Walk Result.png

last result table.png

]]>https://forum.netxms.org/topic/3319/snmp-table-shows-only-blank-fieldsRSS for NodeFri, 13 Nov 2026 17:49:56 GMTWed, 13 Aug 2014 15:36:36 GMT60<![CDATA[Reply to SNMP table shows only blank fields on Thu, 14 Aug 2014 08:29:16 GMT]]>You have to select .1.3.6.1.4.1.9.9.13.1.3.1.2 (or any other working OID inside .1.3.6.1.4.1.9.9.13.1.3.1) as table's base OID, and use .1.3.6.1.4.1.9.9.13.1.3.1.2, .1.3.6.1.4.1.9.9.13.1.3.1.3, etc. for column OIDs. I've created short document with working SNMP table example: http://wiki.netxms.org/wiki/Creating_SNMP_table_DCI.

Best regards,
Victor

]]>https://forum.netxms.org/post/14670https://forum.netxms.org/post/14670Thu, 14 Aug 2014 08:29:16 GMT