<![CDATA[Suspect that my deactivation event doesn't register in event log]]>Hi,

I am trying to make a custom event and custom event processing policy to generate alarm for Percentage of disk usage, but I cannot make the alarms auto-terminate when the disk usage goes under the threshold.

When I keep the default SYS_THRESHOLD_REARMED in data collection configuration -> threshold -> Deactivation event I can see it in the event log so I suspect my custom event.

Is there any way I investigate this further?

]]>https://forum.netxms.org/topic/4085/suspect-that-my-deactivation-event-doesn-t-register-in-event-logRSS for NodeFri, 13 Nov 2026 20:02:17 GMTFri, 06 Nov 2015 16:04:15 GMT60<![CDATA[Reply to Suspect that my deactivation event doesn't register in event log on Mon, 16 Nov 2015 17:44:29 GMT]]>Hi Victor,

I assume you are sure about this as lead developer and I will mark this as resolved. But, I'm sure that I just now adjusted a threshold to be over the last value and the alarm disappeared, I guess it's some other mechanic I see.

I'll use DCI transformation to adjust my values instead of the threshold 🙂

Thanks,
John

]]>https://forum.netxms.org/post/18325https://forum.netxms.org/post/18325Mon, 16 Nov 2015 17:44:29 GMT<![CDATA[Reply to Suspect that my deactivation event doesn't register in event log on Wed, 11 Nov 2015 12:21:41 GMT]]>Yes, this is tricky part - you cannot test threshold by changing it. When you edit threshold internally it leads to deleting old one and adding new one - and new threshold do not have "activated" state, so no deactivation event. For testing thresholds you can use transformation script on DCI which you can change to return value above or below threshold.

Best regards,
Victor

]]>https://forum.netxms.org/post/18265https://forum.netxms.org/post/18265Wed, 11 Nov 2015 12:21:41 GMT<![CDATA[Reply to Suspect that my deactivation event doesn't register in event log on Mon, 09 Nov 2015 13:42:23 GMT]]>Hi,

I have re-created the situation now, see attachments, but basically,

I create a warning-evert and a normal-event
I create an event processing policy
I set the threshold on the node DCI
The warning threshold is triggerd, the event registers in the event log
The alarm appears
I set the threshold value to a higher than the actual value to trigger a normal-event
No event in event log
The alarm is still visible
But, the DCI is OK in Last values view

BR,
John

eventlog.PNG

epp.PNG

thresholds.PNG

alarms.PNG

]]>https://forum.netxms.org/post/18238https://forum.netxms.org/post/18238Mon, 09 Nov 2015 13:42:23 GMT<![CDATA[Reply to Suspect that my deactivation event doesn't register in event log on Mon, 09 Nov 2015 11:00:08 GMT]]>Hi,

policy looks correct, maybe problem is with your thresholds. Can you share threshold configuration please?

Best regards,
Victor

]]>https://forum.netxms.org/post/18234https://forum.netxms.org/post/18234Mon, 09 Nov 2015 11:00:08 GMT<![CDATA[Reply to Suspect that my deactivation event doesn't register in event log on Sat, 07 Nov 2015 23:41:59 GMT]]>Hi,

I use the same key to create the alarm as I do to terminate, I think this should be fine

I suspect that it might be working, one node raised an alarm... But I think the original one doesn't still (need to confirm when I'm at the office). I had modified the thresholds on both the node and the template multiple times, so I'm not sure if it was some kind of hickup somewhere.

alarm_key.PNG

]]>https://forum.netxms.org/post/18218https://forum.netxms.org/post/18218Sat, 07 Nov 2015 23:41:59 GMT<![CDATA[Reply to Suspect that my deactivation event doesn't register in event log on Fri, 06 Nov 2015 17:12:40 GMT]]>Hi,

what alarm keys you are using for alarm creation and termination?

Best regards,
Victor

]]>https://forum.netxms.org/post/18210https://forum.netxms.org/post/18210Fri, 06 Nov 2015 17:12:40 GMT