<![CDATA[Monitor multiple devices using SNMP on one public IP with NAT]]>Hi,
I am running latest stable NetXMS 2.x.
I have few locations/clients, with one public IP, and in local area network there are only local routers and switches, without local server where I can place NetXMS agent.
I want to SNMP pool all local switches and routers using one public IP, but using different SNMP port (I have configured NAT and port forwarding).

The problem is that NetXMS says that I have IP conflict.

What is solution, without new feature requests? 🙂

Thank you

]]>https://forum.netxms.org/topic/4506/monitor-multiple-devices-using-snmp-on-one-public-ip-with-natRSS for NodeFri, 13 Nov 2026 09:47:47 GMTMon, 06 Jun 2016 17:19:28 GMT60<![CDATA[Reply to Monitor multiple devices using SNMP on one public IP with NAT on Fri, 16 Mar 2018 16:32:49 GMT]]>Hi
Any news about this request?

]]>https://forum.netxms.org/post/24020https://forum.netxms.org/post/24020Fri, 16 Mar 2018 16:32:49 GMT<![CDATA[Reply to Monitor multiple devices using SNMP on one public IP with NAT on Thu, 08 Sep 2016 06:02:31 GMT]]>So basically you need some "exclude from network topology" option for the node (we have it already for interfaces). I think it won't be that hard to implement, I'll try to make it in 2.1. I've registered it as feature request - https://dev.raden.solutions/issues/1287.

Best regards,
Victor

]]>https://forum.netxms.org/post/20897https://forum.netxms.org/post/20897Thu, 08 Sep 2016 06:02:31 GMT<![CDATA[Reply to Monitor multiple devices using SNMP on one public IP with NAT on Wed, 07 Sep 2016 15:27:14 GMT]]>I have the same problem. I have many clients and for some of them are technically impossible or it is a security problem to run VPN tunnels.

Now I use CactiEZ - I just add as many nodes as I need with the same host/ip but different SNMP port and it works just fine, and with Graph Trees I group my clients visually in "Monitoring" module so I can see from the first look where is the problem if some alarm is triggered. I miss automated maps, but this is more important for our support needs.

I like NetXMS more, but it is just very hard to use it without this functionality. The same problem have LibreNMS, it works OK for one big network, but it is very hard to use it with devices behind NAT (you must generate different host names for each node behind NAT).

So now zones are very good step ahead, can we hope of possibility to use host/ip flagged as "NAT address" and allow us to have many nodes with the same host/ip that way? Maybe with additional "internal host/ip" that must be unique in the zone?

]]>https://forum.netxms.org/post/20891https://forum.netxms.org/post/20891Wed, 07 Sep 2016 15:27:14 GMT<![CDATA[Reply to Monitor multiple devices using SNMP on one public IP with NAT on Thu, 07 Jul 2016 13:49:24 GMT]]>Another option besides source code change is to create local port mappings on NetXMS server itself on some fake subnet, different local virtual IP for each NAT'ed device.

Best regards,
Victor

]]>https://forum.netxms.org/post/20376https://forum.netxms.org/post/20376Thu, 07 Jul 2016 13:49:24 GMT<![CDATA[Reply to Monitor multiple devices using SNMP on one public IP with NAT on Thu, 07 Jul 2016 12:38:53 GMT]]>@zev said in Monitor multiple devices using SNMP on one public IP with NAT:

One of solutions can be creation of zones and add devices with same IP in different zones.

thank you for the option, I am aware of it.

So if I have about 10 local network switches, behind one router with nat/public ip, i need to have 10 different zones, one for each switch, which is annoying and destroying the organization of netxms nodes.
but thank you for the info.

]]>https://forum.netxms.org/post/20373https://forum.netxms.org/post/20373Thu, 07 Jul 2016 12:38:53 GMT<![CDATA[Reply to Monitor multiple devices using SNMP on one public IP with NAT on Thu, 07 Jul 2016 10:07:55 GMT]]>One of solutions can be creation of zones and add devices with same IP in different zones.

]]>https://forum.netxms.org/post/20369https://forum.netxms.org/post/20369Thu, 07 Jul 2016 10:07:55 GMT<![CDATA[Reply to Monitor multiple devices using SNMP on one public IP with NAT on Thu, 16 Jun 2016 20:22:10 GMT]]>@troffasky said in Monitor multiple devices using SNMP on one public IP with NAT:

@hkusulja said in Monitor multiple devices using SNMP on one public IP with NAT:

I hoped for native NetXMS solution 🙂

Site-to-site VPN? TBH the cheapest VPN-capable router will be about the same price as an SBC to run nxagent on, so not much difference either way.

Can you fool NetXMS with multiple DNS/hosts entries pointed at the same IP address?

I can not change routers.
The problem is not network connectivity, I have NAT with port forwarding and connection is possible.

The problem is in NetXMS configuration, which always translates the DNS hostname to IP , and then I have multiple same IPs for more nudes/devices.

]]>https://forum.netxms.org/post/20172https://forum.netxms.org/post/20172Thu, 16 Jun 2016 20:22:10 GMT<![CDATA[Reply to Monitor multiple devices using SNMP on one public IP with NAT on Thu, 16 Jun 2016 20:11:07 GMT]]>@hkusulja said in Monitor multiple devices using SNMP on one public IP with NAT:

I hoped for native NetXMS solution 🙂

Site-to-site VPN? TBH the cheapest VPN-capable router will be about the same price as an SBC to run nxagent on, so not much difference either way.

Can you fool NetXMS with multiple DNS/hosts entries pointed at the same IP address?

]]>https://forum.netxms.org/post/20171https://forum.netxms.org/post/20171Thu, 16 Jun 2016 20:11:07 GMT<![CDATA[Reply to Monitor multiple devices using SNMP on one public IP with NAT on Mon, 06 Jun 2016 18:00:14 GMT]]>Here you go 🙂
https://www.netxms.org/forum/installation/raspberry-pi-3-compile-agent/msg19784/#msg19784

]]>https://forum.netxms.org/post/20045https://forum.netxms.org/post/20045Mon, 06 Jun 2016 18:00:14 GMT<![CDATA[Reply to Monitor multiple devices using SNMP on one public IP with NAT on Mon, 06 Jun 2016 17:44:31 GMT]]>@tomaskir said in Monitor multiple devices using SNMP on one public IP with NAT:

Solution without new feature request would be to put a Raspberry Pi (or a similiar SBC) into the network and use it as a proxying agent.

Wish I could help in another way, but without a proxy in the network, not much can be done in this case.

Ok, thank you for the info, I will search for the raspbian (.deb) package of netxms agent.

I hoped for native NetXMS solution 🙂

]]>https://forum.netxms.org/post/20043https://forum.netxms.org/post/20043Mon, 06 Jun 2016 17:44:31 GMT<![CDATA[Reply to Monitor multiple devices using SNMP on one public IP with NAT on Mon, 06 Jun 2016 17:21:47 GMT]]>Solution without new feature request would be to put a Raspberry Pi (or a similiar SBC) into the network and use it as a proxying agent.

Wish I could help in another way, but without a proxy in the network, not much can be done in this case.

]]>https://forum.netxms.org/post/20042https://forum.netxms.org/post/20042Mon, 06 Jun 2016 17:21:47 GMT