<![CDATA[NetXMS displaying our products as wrong interface type]]>Hi, we are trying to upgrade our SNMP profile to make sure our ethernet products show up correctly in different SNMP monitoring programs. When we use NetXMS most of the data look fine, but for some reason it displays ifType as 1(other) for our interface even though it should be 6(ethernetCsmacd). If we do a normal poll on ifType it responds with 6(ethernetCsmacd) and if we do a Configuration Poll (full) in NetXMS and check the data on Wireshark we can see that it does respond with a 6, and not a 1.

What could be the reason for NetXMS to display the Interface Type as 1 even though ifType answers 6?

]]>https://forum.netxms.org/topic/4739/netxms-displaying-our-products-as-wrong-interface-typeRSS for NodeFri, 13 Nov 2026 16:44:58 GMTTue, 04 Oct 2016 13:57:44 GMT60<![CDATA[Reply to NetXMS displaying our products as wrong interface type on Thu, 20 Oct 2016 06:33:16 GMT]]>It's definitely unexpected, and it's definitely bug on our side. I'll investigate it further. Thank you!

Best regards,
Victor

]]>https://forum.netxms.org/post/21219https://forum.netxms.org/post/21219Thu, 20 Oct 2016 06:33:16 GMT<![CDATA[Reply to NetXMS displaying our products as wrong interface type on Thu, 20 Oct 2016 06:03:48 GMT]]>Hello Victor. We actually managed to get it to work by activating a loopback interface in our products operating system. Now NetXMS displays two interfaces with one ifType 24 and one ifType 6. Is this unexpected from your side, that this fix made it work better?

Regards, Jesper

]]>https://forum.netxms.org/post/21214https://forum.netxms.org/post/21214Thu, 20 Oct 2016 06:03:48 GMT<![CDATA[Reply to NetXMS displaying our products as wrong interface type on Thu, 20 Oct 2016 05:57:48 GMT]]>Hi,

it's really strange, I don't see anything wrong in capture. Is it possible to provide me remote access via SNMP to your device so I can debug on our side?

Best regards,
Victor

]]>https://forum.netxms.org/post/21211https://forum.netxms.org/post/21211Thu, 20 Oct 2016 05:57:48 GMT<![CDATA[Reply to NetXMS displaying our products as wrong interface type on Tue, 11 Oct 2016 06:31:56 GMT]]>I've tried to compare a wireshark capture from our product with captures from other products that displays the ifType correctly, but I can't really see where our products answers something weird. The only thing I noticed was that other products have 2 ethernet interfaces, the normal one and also a loopback interface. Could the fact that we only have one interface in our products be the cause of the problem?

]]>https://forum.netxms.org/post/21116https://forum.netxms.org/post/21116Tue, 11 Oct 2016 06:31:56 GMT<![CDATA[Reply to NetXMS displaying our products as wrong interface type on Wed, 05 Oct 2016 07:49:58 GMT]]>Hello Victor, We are using Version 2.0.6 (8073). We tried getting the ifIndex from nxsnmpget and it responded with 1, as expected. We also tried ifType and it said 6, also as expected. I will attatch a Wireshark recording from our SNMP agent when doing a configuration poll.

Regards, Jesper

ARM_192.168.15.103.pcapng

]]>https://forum.netxms.org/post/21085https://forum.netxms.org/post/21085Wed, 05 Oct 2016 07:49:58 GMT<![CDATA[Reply to NetXMS displaying our products as wrong interface type on Tue, 04 Oct 2016 15:35:30 GMT]]>Hi,

server requests OID .1.3.6.1.2.1.2.2.1.3.ifIndex and in case of error sets ifType to 1. If device responds correctly than I suppose that for some reason server discards response packet. What NetXMS version you are using? Could you provide packet capture for configuration poll? Please try requesting .1.3.6.1.2.1.2.2.1.3.ifIndex from device using NetXMS command line tool nxsnmpget - will it work as expected?

Best regards,
Victor

]]>https://forum.netxms.org/post/21080https://forum.netxms.org/post/21080Tue, 04 Oct 2016 15:35:30 GMT