<![CDATA[Different switch port layouts on "Ports" tab]]>We have implemented option to have different switch port layouts on "Ports" tab (non default like down-to-up, right-to-left). For now we have changed port layout only for HP A-series (former H3C) as we have one. If you know other SNMP devices that have non standard port layout configuration please share. Will be happy to set correct configuration for them.

]]>https://forum.netxms.org/topic/4859/different-switch-port-layouts-on-ports-tabRSS for NodeFri, 13 Nov 2026 10:36:20 GMTMon, 09 Jan 2017 14:00:12 GMT60<![CDATA[Reply to Different switch port layouts on "Ports" tab on Sun, 05 Mar 2017 16:56:37 GMT]]>fortigate 100d:
OID: .1.3.6.1.4.1.12356.101.1.1004

fortinet.jpg

]]>https://forum.netxms.org/post/21930https://forum.netxms.org/post/21930Sun, 05 Mar 2017 16:56:37 GMT<![CDATA[Reply to Different switch port layouts on "Ports" tab on Mon, 27 Feb 2017 10:34:54 GMT]]>CISCO SG200-26:
OID: .1.3.6.1.4.1.9.6.1.88.26.1
1 2 3 4 5 6 7 8 9 10 11 12                    25C 25F
13 14 15 16 17 18 19 20 21 22 23 24    26C 26F

CISCO SG250-26:
OID: .1.3.6.1.4.1.9.6.1.97.26.1
1 2 3 4 5 6 7 8 9 10 11 12                    25C 25F
13 14 15 16 17 18 19 20 21 22 23 24    26C 26F

ZyXEL GS2210-8
OID: .1.3.6.1.4.1.890.1.15
2 4 6 8    10C 10F
1 3 5 7    9C  9F

ZyXEL GS1900-8
OID: .1.3.6.1.4.1.890.1.15
1 2 3 4 5 6 7 8

ZyXEL GS1900-24E
OID: .1.3.6.1.4.1.890.1.15
2 4 6 8 10 12 14 16 18 20 22 24
1 3 5 7 9 11 13 15 17 19 21 23

ZyXEL GS1920-24
OID: .1.3.6.1.4.1.890.1.15
2 4 6 8 10 12 14 16 18 20 22 24    26C 28C 26F 28F
1 3 5 7 9 11 13 15 17 19 21 23      25C 27C 25F 27F

(Combo Ports are marked as 'C' for Copper and 'F' for Fiber)

]]>https://forum.netxms.org/post/21899https://forum.netxms.org/post/21899Mon, 27 Feb 2017 10:34:54 GMT<![CDATA[Reply to Different switch port layouts on "Ports" tab on Mon, 27 Feb 2017 09:22:02 GMT]]>I have two types of HP Switch:

HP A5120-48G EI Switch
.1.3.6.1.4.1.25506.11.1.34
2 rows, down-up, left-right:
2  4  6 ...
1  3  5 ...

HP A5800-24G Switch
.1.3.6.1.4.1.25506.11.1.16
2 rows, up-down, left-right:
1  3  5 ...
2  4  6 ...

]]>https://forum.netxms.org/post/21897https://forum.netxms.org/post/21897Mon, 27 Feb 2017 09:22:02 GMT<![CDATA[Reply to Different switch port layouts on "Ports" tab on Wed, 18 Jan 2017 14:33:11 GMT]]>@victor said in Different switch port layouts on "Ports" tab:

Switch OID - value of .1.3.6.1.2.1.1.2.0. For example, on my H3C switch:

victor@hp8570w ~ $ /opt/netxms/bin/nxsnmpget 10.5.4.1 .1.3.6.1.2.1.1.2.0
.1.3.6.1.2.1.1.2.0 [OBJECT IDENTIFIER]: .1.3.6.1.4.1.43.1.16.4.3.83

Port layout - just specify how many rows and how numbering goes. Same H3C example:
2 rows, numbering down-up then left-right:
2 4 6 8 ...
1 3 5 7 ...

Best regards,
Victor

System Description=DES-3200-28/C1 Fast Ethernet Switch
SNMP Object ID=.1.3.6.1.4.1.171.10.113.5.1

DES-3200-28(C1)_layout.jpg

]]>https://forum.netxms.org/post/21685https://forum.netxms.org/post/21685Wed, 18 Jan 2017 14:33:11 GMT<![CDATA[Reply to Different switch port layouts on "Ports" tab on Mon, 16 Jan 2017 08:13:36 GMT]]>Switch OID - value of .1.3.6.1.2.1.1.2.0. For example, on my H3C switch:

victor@hp8570w ~ $ /opt/netxms/bin/nxsnmpget 10.5.4.1 .1.3.6.1.2.1.1.2.0
.1.3.6.1.2.1.1.2.0 [OBJECT IDENTIFIER]: .1.3.6.1.4.1.43.1.16.4.3.83

Port layout - just specify how many rows and how numbering goes. Same H3C example:
2 rows, numbering down-up then left-right:
2 4 6 8 ...
1 3 5 7 ...

Best regards,
Victor

]]>https://forum.netxms.org/post/21656https://forum.netxms.org/post/21656Mon, 16 Jan 2017 08:13:36 GMT<![CDATA[Reply to Different switch port layouts on "Ports" tab on Sun, 15 Jan 2017 11:39:13 GMT]]>@victor said in Different switch port layouts on "Ports" tab:

When reporting devices, please specify it's SNMP OID and actual port layout - that will save us lot of time looking for that information.

Please Provide an example of how it should look like and how do we show it here.

]]>https://forum.netxms.org/post/21650https://forum.netxms.org/post/21650Sun, 15 Jan 2017 11:39:13 GMT<![CDATA[Reply to Different switch port layouts on "Ports" tab on Sat, 14 Jan 2017 09:13:30 GMT]]>When reporting devices, please specify it's SNMP OID and actual port layout - that will save us lot of time looking for that information.

]]>https://forum.netxms.org/post/21649https://forum.netxms.org/post/21649Sat, 14 Jan 2017 09:13:30 GMT<![CDATA[Reply to Different switch port layouts on "Ports" tab on Wed, 11 Jan 2017 19:56:44 GMT]]>@zev said in Different switch port layouts on "Ports" tab:

We have implemented option to have different switch port layouts on "Ports" tab (non default like down-to-up, right-to-left). For now we have changed port layout only for HP A-series (former H3C) as we have one. If you know other SNMP devices that have non standard port layout configuration please share. Will be happy to set correct configuration for them.

D-Link DES3200-28C1, DGS-3120S\C, DES-3528, DGS-3000-10 and other.

Juniper MX series.

]]>https://forum.netxms.org/post/21633https://forum.netxms.org/post/21633Wed, 11 Jan 2017 19:56:44 GMT<![CDATA[Reply to Different switch port layouts on "Ports" tab on Mon, 09 Jan 2017 18:57:43 GMT]]>Hi,

I have D'Link DGS-3612G, it's port numbering is single line from left to right.

]]>https://forum.netxms.org/post/21612https://forum.netxms.org/post/21612Mon, 09 Jan 2017 18:57:43 GMT<![CDATA[Reply to Different switch port layouts on "Ports" tab on Mon, 09 Jan 2017 15:02:15 GMT]]>hi,

i have cisco ews and dell power connect.

10x,
lindeamon

]]>https://forum.netxms.org/post/21611https://forum.netxms.org/post/21611Mon, 09 Jan 2017 15:02:15 GMT