<![CDATA[Working with Ping Subagent]]>I have been unable to get a DCI to work for the icmp parameters. I have already read though the Ping Subagent documentation but this does not give an example of what the finished configuration should look like and even where to configure it. I only discovery where is goes through another topic for WinPerf.

Could someone please provide an example of an nxagentd.conf with the Ping subagent configured ???

Thanks in advance!

]]>https://forum.netxms.org/topic/491/working-with-ping-subagentRSS for NodeFri, 13 Nov 2026 07:26:31 GMTWed, 15 Oct 2008 16:13:50 GMT60<![CDATA[Reply to Working with Ping Subagent on Wed, 15 Oct 2008 21:46:32 GMT]]>Thank you for the quick response!!! 😄

]]>https://forum.netxms.org/post/2470https://forum.netxms.org/post/2470Wed, 15 Oct 2008 21:46:32 GMT<![CDATA[Reply to Working with Ping Subagent on Wed, 15 Oct 2008 18:55:27 GMT]]>here is an example of one of mine:

MasterServers = 10.32.3.49
LogFile = {syslog}
FileStore = C:\NetXMS\var
SubAgent = ecs.nsm
SubAgent = ping.nsm
SubAgent = portcheck.nsm
SubAgent = winperf.nsm
SubAgent = wmi.nsm

*PING
Target = 10.64.80.17
Target = 10.64.71.13
Target = 10.64.65.14
Target = 10.64.60.14
Target = 10.64.20.15
Target = 10.32.70.10
Target = 10.32.3.98
Target = 10.32.3.96
Target = 10.32.3.95
Target = 10.32.3.66
Target = 10.32.3.217
Target = 10.15.16.21
Target = 10.121.2.15

]]>https://forum.netxms.org/post/2469https://forum.netxms.org/post/2469Wed, 15 Oct 2008 18:55:27 GMT