<![CDATA[SNMP Walk not showing values, only datatype]]>Hi,

I have upgraded from 2.1 to 2.2.2, running on a Ubuntu 16.04
Since the upgrade when setting up new data collection items using SNMP walk, there are no values shown.
SNMP requests are working fine - I get octett values for the interfaces and can display them via "History", all the graphs are still working/updated, etc.
I have checked via tcpdump that when starting the SNMP walk a "GetNextRequest" is sent to the server in question and a "GetResponse" is received by the NetXMS-Server (I asked for ".1.3.6.1.2.1.1.6"/SysLocation and got  .1.3.6.1.2.1.1.6.0 and the corrrect value back).
So in general SNMP requests are working, just no values are shown - please see the attached example (a walk on .1.3.6.1.2.1.1).

Can anybody help?

Unbenannt.PNG

]]>https://forum.netxms.org/topic/5422/snmp-walk-not-showing-values-only-datatypeRSS for NodeFri, 13 Nov 2026 11:49:12 GMTTue, 30 Jan 2018 14:39:41 GMT60<![CDATA[Reply to SNMP Walk not showing values, only datatype on Thu, 08 Feb 2018 09:23:52 GMT]]>@Tatjana:
Thanks for the info and the workaround - that will help me until the update comes.

]]>https://forum.netxms.org/post/23846https://forum.netxms.org/post/23846Thu, 08 Feb 2018 09:23:52 GMT<![CDATA[Reply to SNMP Walk not showing values, only datatype on Thu, 08 Feb 2018 08:47:27 GMT]]>We have fond that now there is error in displaying results of walk when accessing through Data Collection Configuration->Properties of DCI->Select...->Walk. We will fix it in next release. For now you can add metrics through "MIB Expolorer view".

]]>https://forum.netxms.org/post/23845https://forum.netxms.org/post/23845Thu, 08 Feb 2018 08:47:27 GMT<![CDATA[Reply to SNMP Walk not showing values, only datatype on Thu, 01 Feb 2018 15:50:59 GMT]]>Hi Victor,

to make sure, I did a fresh download of the Win32-x64-console-binary, unpacked it in a separate folder, renamed the .nxmc-folder in my home directory so it would start with a fresh one. Given that the layout was totally different then, it must have worked.
The SNMP-Walk problem stayed nevertheless.
The console-binary says its Version 2.2.2(build 9504), the netxms-Server is version 2.2.2-1 from the repository: "http://packages.netxms.org/ubuntu/ trusty main".
The command "netxmsd -v" gives this output:
NetXMS Server Version 2.2.2 Build 9504 (2.2.2) (UNICODE)
NXCP: 4.48.1.12 (AES-256, Blowfish-256, 3DES, AES-128, Blowfish-128)
Built with: g++ (Ubuntu 4.8.2-19ubuntu1) 4.8.2

So it at least seems to be the same.

]]>https://forum.netxms.org/post/23797https://forum.netxms.org/post/23797Thu, 01 Feb 2018 15:50:59 GMT<![CDATA[Reply to SNMP Walk not showing values, only datatype on Thu, 01 Feb 2018 15:20:11 GMT]]>Hi,

it seems that you have wrong version of client application. Make sure you have correct version, and in case you unpack it on top of old version, try to remove old version completely and unpack into clean folder.

Best regards,
Victor

]]>https://forum.netxms.org/post/23796https://forum.netxms.org/post/23796Thu, 01 Feb 2018 15:20:11 GMT<![CDATA[Reply to SNMP Walk not showing values, only datatype on Thu, 01 Feb 2018 09:22:52 GMT]]>ok, it was only a quick guess, as I had this problem once in the past  🙂

]]>https://forum.netxms.org/post/23793https://forum.netxms.org/post/23793Thu, 01 Feb 2018 09:22:52 GMT<![CDATA[Reply to SNMP Walk not showing values, only datatype on Thu, 01 Feb 2018 09:21:30 GMT]]>Hi Dani@M3T,

no, this setting is not active.

]]>https://forum.netxms.org/post/23792https://forum.netxms.org/post/23792Thu, 01 Feb 2018 09:21:30 GMT<![CDATA[Reply to SNMP Walk not showing values, only datatype on Thu, 01 Feb 2018 08:43:36 GMT]]>is 'connection over slow link' activated in your management console?

]]>https://forum.netxms.org/post/23791https://forum.netxms.org/post/23791Thu, 01 Feb 2018 08:43:36 GMT<![CDATA[Reply to SNMP Walk not showing values, only datatype on Wed, 31 Jan 2018 14:20:37 GMT]]>Hi,

datatypes seem correct to me (you can check for yourself in the attached screenshot in my first posting) - "STRING" for "SysDescr" is pretty plausible.
I can retrieve and display the "SysDescr" value by SNMP without a problem - it just does not show in a SNMP walk (just like all other values, but which are also retrievable and meaningful). I have also checked on other Servers/Routers that I know for sure worked before the upgrade to 2.2.2.

]]>https://forum.netxms.org/post/23782https://forum.netxms.org/post/23782Wed, 31 Jan 2018 14:20:37 GMT<![CDATA[Reply to SNMP Walk not showing values, only datatype on Wed, 31 Jan 2018 12:21:48 GMT]]>Hello ,

Is the datatype of the DCI correct ? if it is not usually the result is null/blank.

]]>https://forum.netxms.org/post/23778https://forum.netxms.org/post/23778Wed, 31 Jan 2018 12:21:48 GMT