<![CDATA[Netxms - send sms feature]]>Greetings,
One of our colleagues recommended netxms few weeks ago, so we decided to test it out on our companies Infra - and so far so good.
However, we did run into an issue today.
We tried setting up the "send sms" feature with the Portech MV-372, as referrenced in NETXMS 2.0 Administrator guide / Appendix - section "SMS Drivers"
We followed the steps and set everything up as follows (see screenshot)
where the wan port on the portech sms gateway is set to 192.168.200.12/24, nextms server hosted on localhost (192.168.200.27*/24)

Main problem is that sending sms via portech webgui works, whereas netxms does not.
We have tried various mods of SMSDrvConfig; ie
changing mode=T/P and similar.
any suggestions welcome  🙂

EDIT 14.2.2018
attached debug log lvl5  (we used an actual phone number, not the imaginary one listed in the log)
again, any help or tips would be greatly appreciated.

portechsets1.jpg

netxmsettings1.jpg

debug.log.sms..txt

]]>https://forum.netxms.org/topic/5449/netxms-send-sms-featureRSS for NodeFri, 13 Nov 2026 15:07:57 GMTTue, 13 Feb 2018 14:46:38 GMT60<![CDATA[Reply to Netxms - send sms feature on Tue, 20 Feb 2018 18:50:43 GMT]]>Release 2.2.4 will contain improved Portech driver that should work with newer gateway versions.

Best regards,
Victor

]]>https://forum.netxms.org/post/23908https://forum.netxms.org/post/23908Tue, 20 Feb 2018 18:50:43 GMT