<![CDATA[Strange interface counting and port view]]>Hello,

I have some modulare HP 5412 switches. The component view looks pretty good. Several modules as container and ports from Letter 1-24 (A1-A24, B1-B24,...).
The interface names in interface view are also right, even the ifIndex is incrementing correctly (A1=1, A24=24, B1=25, B24=48), BUT the port number is wrong.

A1=1, A23=23, A24=0, B1=1, B23=23, B24=0

This leads to display errors in port view. Sometime even one port (24) is missing per module and most modules start with port 0 instead of 1.

For further info watch the screenshots.

xms-components.PNG

xms-interface.PNG

xms-ports.PNG

]]>https://forum.netxms.org/topic/5795/strange-interface-counting-and-port-viewRSS for NodeFri, 13 Nov 2026 16:55:40 GMTWed, 16 Jan 2019 08:43:39 GMT60<![CDATA[Reply to Strange interface counting and port view on Thu, 31 Jan 2019 13:11:38 GMT]]>Update: I likely found the reason for this error in numbering. Next release should show it correctly.

Best regards,
Victor

]]>https://forum.netxms.org/post/25285https://forum.netxms.org/post/25285Thu, 31 Jan 2019 13:11:38 GMT<![CDATA[Reply to Strange interface counting and port view on Tue, 29 Jan 2019 14:56:46 GMT]]>Hi,

what is device OID and what driver is selected? If it is PROCURVE, please check if node has custom attributes .procurve.isModular and .procurve.slotSize.

Best regards,
Victor

]]>https://forum.netxms.org/post/25273https://forum.netxms.org/post/25273Tue, 29 Jan 2019 14:56:46 GMT