What about:
Select MIB to load - selects from one of the 8600 publicly available that could be included in a mib library
It copies the mib to the mibs folder (this being the active mibs) and compiles it.
After ticking box for Open SNMP Trap Processor after loading" - opens trap processor.
List of traps from the MIB are in list view - multiple traps can be selected.
Tick box at top - create alarm from trap based on mib details - including severity.
Automatically loads the trap, its parameters, and severity, all the way through - for each of the multiple traps selected.

Drops the 20 minute process down to 20 seconds.