<![CDATA[The string "[0]" instead of interface name in FDB for non-trunk ports]]>I USE NODE TOPOLOGY->SWITCH FORWARDING TABLE (MAC ADDRESS TABLE) FOR HP ARUBA SWITCH S2500 & S3500,

NetXMS:
Version: 2.2.16
Platform: Windows, 64-bit
Database: PostgreSQL

ALL ARUBA S2500 & S3500 SWITCH  is detected as GENERIC driver by NetXMS.

Problem:
Switchports that are in access mode in vlan 1, and ports that are in trunk mode and include vlan 1 in trunk vlans list are identified properly.
However, ports that do not include vlan 1 are shown as interface name "[ 0 ]" in the "Topology -> Switch forwarding database (MAC address table)" screen.
so i can't to know what peer node,problem screen is below

.1.3.6.1.2.1.17.1.4.1.2

.1.3.6.1.2.1.2.1.0

.1.3.6.1.2.1.2.2.1.1

.1.3.6.1.2.1.31.1.1.1.1

.1.3.6.1.2.1.2.2.1.2

Problem-mac-forwarding-table.png

.1.3.6.1.2.1.17.1.4.1.2.png

.1.3.6.1.2.1.2.1.0.png

.1.3.6.1.2.1.2.2.1.1.png

.1.3.6.1.2.1.31.1.1.1.1.png

]]>https://forum.netxms.org/topic/6099/the-string-0-instead-of-interface-name-in-fdb-for-non-trunk-portsRSS for NodeFri, 13 Nov 2026 21:53:57 GMTFri, 23 Aug 2019 01:39:35 GMT60