<![CDATA[Commnunication error NetXMS Server Version 3.6.300]]>Hey, there. Unexpected communication error NetXMS Server Version 3.6.300. I attach a screenshot of the popup window.

Any idea how to fix this communication issue?

ping command output between netxms client and server:

icmp_seq=1 ttl=63 time=0.492 ms
icmp_seq=2 ttl=63 time=0.314 ms
icmp_seq=3 ttl=63 time=0.331 ms
icmp_seq=4 ttl=63 time=0.217 ms

Thanks in Advance

netxmscommunicationerror.png

]]>https://forum.netxms.org/topic/6812/commnunication-error-netxms-server-version-3.6.300RSS for NodeFri, 13 Nov 2026 15:21:40 GMTSat, 12 Dec 2020 20:10:13 GMT60<![CDATA[Reply to Commnunication error NetXMS Server Version 3.6.300 on Wed, 23 Dec 2020 07:28:43 GMT]]>Most likely it is caused by bug we have fixed recently in development branch. Fix should be included into upcoming 3.7 release.

Best regards,
Victor

]]>https://forum.netxms.org/post/29118https://forum.netxms.org/post/29118Wed, 23 Dec 2020 07:28:43 GMT<![CDATA[Reply to Commnunication error NetXMS Server Version 3.6.300 on Wed, 16 Dec 2020 16:23:12 GMT]]>10 lines of log are not enough - they span for less then 0.1 seconds. Let's improve the process:

nxadm -c "debug client.* 6"
nxadm -c "logmark"
<replicate the error>
nxadm -c "debug client.* -1"

This will produce
2020.12.16 18:20:52.119 *D* [                  ] ******* MARK *******
line to server log. We need the log file from that mark to the end of the file.

]]>https://forum.netxms.org/post/29080https://forum.netxms.org/post/29080Wed, 16 Dec 2020 16:23:12 GMT<![CDATA[Reply to Commnunication error NetXMS Server Version 3.6.300 on Wed, 16 Dec 2020 14:52:50 GMT]]>Hi, Fillip. I followed your directions. Note: I had to put <ip address> instead our ip address for security reasons.

josemb@hpserver1:~$ nxadm -c "debug client.* 6"
Debug level for tag "client.*" set to 6

osemb@hpserver1:~$ tail -n 10 /var/log/netxmsd
2020.12.16 14:45:41.555 *D* [client.session.0  ] Sending compressed message CMD_OBJECT_UPDATE (560 bytes)
2020.12.16 14:45:41.556 *D* [client.session.0  ] Scheduling update for object <ip address> [23185]
2020.12.16 14:45:41.556 *D* [client.session.0  ] Scheduling update for object <ip address> [25341]
2020.12.16 14:45:41.556 *D* [client.session.0  ] Sending update for object <ip address> [23185]
2020.12.16 14:45:41.557 *D* [client.session.0  ] Sending compressed message CMD_OBJECT_UPDATE (584 bytes)
2020.12.16 14:45:41.557 *D* [client.session.0  ] Sending update for object <ip address> [25341]
2020.12.16 14:45:41.558 *D* [client.session.0  ] Sending compressed message CMD_OBJECT_UPDATE (584 bytes)
2020.12.16 14:45:41.620 *D* [client.session.0  ] Scheduling update for object <ip address> [33950]
2020.12.16 14:45:41.620 *D* [client.session.0  ] Sending update for object <ip address> [33950]
2020.12.16 14:45:41.623 *D* [client.session.0  ] Sending compressed message CMD_OBJECT_UPDATE (1448 bytes)

josemb@hpserver1:~$ nxadm -c "debug client.* -1"
Debug level for tag "client.*" set to default

Thanks in advance.

]]>https://forum.netxms.org/post/29077https://forum.netxms.org/post/29077Wed, 16 Dec 2020 14:52:50 GMT<![CDATA[Reply to Commnunication error NetXMS Server Version 3.6.300 on Wed, 16 Dec 2020 12:00:30 GMT]]>Let's try to get some more debug information. Can you please run the following command in the command line on the server:

nxadm -c "debug client.* 6"

This will increase debug level for log messages related to communication with the console.
Then try to open IP neighbors window and wait for the error.
When the error shows, turn off the additional debugging

nxadm -c "debug client.* -1"

and send us server log file

]]>https://forum.netxms.org/post/29069https://forum.netxms.org/post/29069Wed, 16 Dec 2020 12:00:30 GMT<![CDATA[Reply to Commnunication error NetXMS Server Version 3.6.300 on Mon, 14 Dec 2020 16:35:24 GMT]]>Hi, Filipp. First thanks for your help. Second, the Desktop Managment tool works fine until I want to open the Neighbors IP window of one our major network routers. Then the SWT software get freezed. After few seconds appeared a popup window with the following message: SWT is not responding. I attached a screenshot of it. I checked the netXMS server log out. I pasted the latest 10 lines of this file. I pasted the latest ten lines of the SWT log file, as well. Finally, the netXMS  server did not restart in that moment.

josemb@hpserver1:/var/log$ tail -n 10 netxmsd
2020.12.14 14:31:05.347 *E* [watchdog          ] Thread "Syncer Thread" does not respond to watchdog thread
2020.12.14 14:31:23.209 *I* [watchdog          ] Thread "Syncer Thread" returned to running state
2020.12.14 14:33:05.348 *E* [watchdog          ] Thread "Syncer Thread" does not respond to watchdog thread
2020.12.14 14:33:25.513 *I* [watchdog          ] Thread "Syncer Thread" returned to running state
2020.12.14 14:55:25.354 *E* [watchdog          ] Thread "Syncer Thread" does not respond to watchdog thread
2020.12.14 14:55:39.732 *I* [watchdog          ] Thread "Syncer Thread" returned to running state
2020.12.14 15:33:45.365 *E* [watchdog          ] Thread "Syncer Thread" does not respond to watchdog thread
2020.12.14 15:34:06.304 *I* [watchdog          ] Thread "Syncer Thread" returned to running state
2020.12.14 16:04:25.376 *E* [watchdog          ] Thread "Syncer Thread" does not respond to watchdog thread
2020.12.14 16:04:25.968 *I* [watchdog          ] Thread "Syncer Thread" returned to running state

########################

Desktop Manager tool log file

!MESSAGE Creating keepalive timer

!ENTRY org.netxms.ui.eclipse.console 1 0 2020-12-14 10:14:45.541
!MESSAGE Login job completed

!ENTRY org.netxms.ui.eclipse.alarmviewer 1 0 2020-12-14 10:17:45.105
!MESSAGE Skipping alarm tray popup creation - too many consecutive alarms

!ENTRY org.netxms.ui.eclipse.alarmviewer 1 0 2020-12-14 10:23:13.550
!MESSAGE Skipping alarm tray popup creation - too many consecutive alarms

I hope these help.

Best regards.

Jose

swtnotresponding1.png

]]>https://forum.netxms.org/post/29053https://forum.netxms.org/post/29053Mon, 14 Dec 2020 16:35:24 GMT<![CDATA[Reply to Commnunication error NetXMS Server Version 3.6.300 on Mon, 14 Dec 2020 09:42:16 GMT]]>Was it one-time occurence or it happens often? Currently the probocol between management console and server is not tolerant to interruptions and console needs to be restarted.
Is there anything is netxms server log at that moment? Did server restart that moment?

]]>https://forum.netxms.org/post/29038https://forum.netxms.org/post/29038Mon, 14 Dec 2020 09:42:16 GMT