<![CDATA[Alarms generated from syslog monitoring]]>I have successfully configured Syslog Monitoring and I am receiving messages from all agent nodes.  How can I create alarms from the syslog monitoring message entries?

]]>https://forum.netxms.org/topic/7008/alarms-generated-from-syslog-monitoringRSS for NodeFri, 13 Nov 2026 08:58:48 GMTTue, 30 Mar 2021 15:50:14 GMT60<![CDATA[Reply to Alarms generated from syslog monitoring on Mon, 05 Apr 2021 12:27:58 GMT]]>It is referenced in the Syslog Basics video

]]>https://forum.netxms.org/post/29803https://forum.netxms.org/post/29803Mon, 05 Apr 2021 12:27:58 GMT<![CDATA[Reply to Alarms generated from syslog monitoring on Thu, 01 Apr 2021 12:49:34 GMT]]>Hi!

Which exactly training materials, were they prepared by Raden Solutions or some third party?
I suppose disk_logger is some 3-rd party app that can send syslog messages. Not sure if it's giving any benefits over netxms agent when monitoring a system.

]]>https://forum.netxms.org/post/29799https://forum.netxms.org/post/29799Thu, 01 Apr 2021 12:49:34 GMT<![CDATA[Reply to Alarms generated from syslog monitoring on Thu, 01 Apr 2021 12:40:17 GMT]]>Hi Filipp,
In the training materials I see references to disk_logger.  Is that incorporated into NetXMS or is it a 3rd party app?

]]>https://forum.netxms.org/post/29798https://forum.netxms.org/post/29798Thu, 01 Apr 2021 12:40:17 GMT<![CDATA[Reply to Alarms generated from syslog monitoring on Wed, 31 Mar 2021 23:48:46 GMT]]>You need to create log parser definition in Configuration -> Syslog parser.

There could be several definitions, each is a filter that only reacts to particular conditions - syslog text, source, etc.
Each definition specifies an event that is triggered.
Then in Event Processing Policy you need to have a rules for these events. These rules can create alarms, terminate alarms, send notifications, etc.

]]>https://forum.netxms.org/post/29788https://forum.netxms.org/post/29788Wed, 31 Mar 2021 23:48:46 GMT