<![CDATA[NetXMS 4.0 patch release 4.0.2157]]>Hi all!

We just published another patch release for 4.0 that fixes some newly found issues:

NX-2212 (Agent segmentation fault when accessing table Hardware.NetworkAdapters)
NX-2213 (Set event parameter from NXSL by index)

It also adds new parameter Oracle.Cursors.MaxPerSession to Oracle subagent.

Best regards,
Victor

]]>https://forum.netxms.org/topic/7312/netxms-4.0-patch-release-4.0.2157RSS for NodeFri, 13 Nov 2026 09:18:32 GMTTue, 22 Feb 2022 08:51:04 GMT60<![CDATA[Reply to NetXMS 4.0 patch release 4.0.2157 on Thu, 24 Mar 2022 12:26:56 GMT]]>Hi have upgraded our NetXMS from 3.9.298 our alarm summary has changed back to default. However I checked the server configuration and this was set correctly. Checked scheduled tasks - show system tasks and this was set to 0 0 * * * rather than the time we set 10 06 * * * in server coniguration. Maybe a bug?

]]>https://forum.netxms.org/post/31162https://forum.netxms.org/post/31162Thu, 24 Mar 2022 12:26:56 GMT<![CDATA[Reply to NetXMS 4.0 patch release 4.0.2157 on Tue, 22 Mar 2022 10:22:05 GMT]]>Спасибо)

]]>https://forum.netxms.org/post/31157https://forum.netxms.org/post/31157Tue, 22 Mar 2022 10:22:05 GMT<![CDATA[Reply to NetXMS 4.0 patch release 4.0.2157 on Tue, 22 Mar 2022 10:11:37 GMT]]>Действительно не работает. Только что исправили, в следующем патч релизе будет работать.

]]>https://forum.netxms.org/post/31155https://forum.netxms.org/post/31155Tue, 22 Mar 2022 10:11:37 GMT<![CDATA[Reply to NetXMS 4.0 patch release 4.0.2157 on Tue, 22 Mar 2022 07:08:18 GMT]]>эту опцию знаю, но не помогает)

12.png

]]>https://forum.netxms.org/post/31154https://forum.netxms.org/post/31154Tue, 22 Mar 2022 07:08:18 GMT<![CDATA[Reply to NetXMS 4.0 patch release 4.0.2157 on Tue, 22 Mar 2022 07:03:20 GMT]]>Перепутал немного, называется "translucent":

translucent.jpg

]]>https://forum.netxms.org/post/31153https://forum.netxms.org/post/31153Tue, 22 Mar 2022 07:03:20 GMT<![CDATA[Reply to NetXMS 4.0 patch release 4.0.2157 on Tue, 22 Mar 2022 06:51:02 GMT]]>а это где, я что то не могу найти эту опцию?

]]>https://forum.netxms.org/post/31149https://forum.netxms.org/post/31149Tue, 22 Mar 2022 06:51:02 GMT<![CDATA[Reply to NetXMS 4.0 patch release 4.0.2157 on Tue, 22 Mar 2022 06:47:51 GMT]]>@hayarm said in NetXMS 4.0 patch release 4.0.2157:

Здравствуйте, поменялись цвета в графах,  не совподает с выбранным.

Там полупрозрачная заливка, попробуйте убрать опцию "transparent" в свойствах графика.

]]>https://forum.netxms.org/post/31147https://forum.netxms.org/post/31147Tue, 22 Mar 2022 06:47:51 GMT<![CDATA[Reply to NetXMS 4.0 patch release 4.0.2157 on Mon, 21 Mar 2022 13:18:50 GMT]]>было бы хорошо сделать возможность отключить имена нода в dashboard-е
в world map есть такая возможность

1.png

2.png

]]>https://forum.netxms.org/post/31146https://forum.netxms.org/post/31146Mon, 21 Mar 2022 13:18:50 GMT<![CDATA[Reply to NetXMS 4.0 patch release 4.0.2157 on Mon, 21 Mar 2022 17:40:20 GMT]]>Здравствуйте, поменялись цвета в графах,  не совподает с выбранным.

1.png

]]>https://forum.netxms.org/post/31145https://forum.netxms.org/post/31145Mon, 21 Mar 2022 17:40:20 GMT<![CDATA[Reply to NetXMS 4.0 patch release 4.0.2157 on Wed, 02 Mar 2022 00:53:14 GMT]]>Ran a standard apt upgrade to get the latest over a 3.9.4xx version.  I received the following error during the package installation / database upgrade:

Upgrading from version 40.95 to 40.96
SQL query failed (Row size too large. The maximum row size for the used table type, not counting BLOBs, is 8126. This includes storage overhead, check the manual. You have to change some columns to TEXT or BLOBs):
ALTER TABLE items ADD state_flags integer

This was resolved with the following SQL commands being issued against the NetXMS database:

alter table items ROW_FORMAT=DYNAMIC
alter table items DROP COLUMN state_flags
alter table dc_tables ROW_FORMAT=DYNAMIC

Hope this helps somebody and that this error can be resolved for others upgrading.  Thanks!

]]>https://forum.netxms.org/post/31090https://forum.netxms.org/post/31090Wed, 02 Mar 2022 00:53:14 GMT<![CDATA[Reply to NetXMS 4.0 patch release 4.0.2157 on Wed, 23 Feb 2022 12:56:57 GMT]]>@egert143 said in NetXMS 4.0 patch release 4.0.2157:

@victor said in NetXMS 4.0 patch release 4.0.2157:

@curuser said in NetXMS 4.0 patch release 4.0.2157:

Hi!

I'm facing some problems with package deployment.

For example: msi-Package "A" is successfully deployed to most nodes but for some the message "file transfer failed" appears.
msi-Package "B,C,D" are successfully deployed to nodes where Package "A" fails.

Another case: Message "timeout" appears - in fact package has been successfully deployed (not really a problem)

Best regards.

Hi,

could you provide logs from problematic agents (preferably on high debug level, 5 or 6)?

Best regards,
Victor

Possibly related: https://www.netxms.org/forum/general-support/agent-upgrade-via-package-manager-fails/

Hi!
some additional info

  • there are no "part-files"
  • the files are merged - setup can be started with the transfered file

Regards

nxagent.log

]]>https://forum.netxms.org/post/31080https://forum.netxms.org/post/31080Wed, 23 Feb 2022 12:56:57 GMT<![CDATA[Reply to NetXMS 4.0 patch release 4.0.2157 on Wed, 23 Feb 2022 11:52:05 GMT]]>@victor said in NetXMS 4.0 patch release 4.0.2157:

@curuser said in NetXMS 4.0 patch release 4.0.2157:

Hi!

I'm facing some problems with package deployment.

For example: msi-Package "A" is successfully deployed to most nodes but for some the message "file transfer failed" appears.
msi-Package "B,C,D" are successfully deployed to nodes where Package "A" fails.

Another case: Message "timeout" appears - in fact package has been successfully deployed (not really a problem)

Best regards.

Hi,

could you provide logs from problematic agents (preferably on high debug level, 5 or 6)?

Best regards,
Victor

Possibly related: https://www.netxms.org/forum/general-support/agent-upgrade-via-package-manager-fails/

]]>https://forum.netxms.org/post/31079https://forum.netxms.org/post/31079Wed, 23 Feb 2022 11:52:05 GMT<![CDATA[Reply to NetXMS 4.0 patch release 4.0.2157 on Wed, 23 Feb 2022 11:45:53 GMT]]>@victor said in NetXMS 4.0 patch release 4.0.2157:

@spheron said in NetXMS 4.0 patch release 4.0.2157:

Hello @all,

i fenced a problem too... If i select more then 16x DCI and choose Line Chart from the right click menu, the chart is not display correct. This bug i have in dashboards, too.

Bug is present since V4.0.2157.

Greetings
Marco

Hi,

actually charts does not support more than 16 items, and it was like this since very old versions.

Best regards,
Victor

Hi Victor,

thanks for the info. Until the last NetXMS Update the Dashboard Charts shows Values/Graphs, but perhaps only max 16 Items... At the actual Version the dashboard chart stops working and shows nothing... Anyway, i reduced the DCIs and the dashboard works again...

Greeting
Marco

]]>https://forum.netxms.org/post/31078https://forum.netxms.org/post/31078Wed, 23 Feb 2022 11:45:53 GMT<![CDATA[Reply to NetXMS 4.0 patch release 4.0.2157 on Tue, 22 Feb 2022 20:34:17 GMT]]>@curuser said in NetXMS 4.0 patch release 4.0.2157:

Hi!

I'm facing some problems with package deployment.

For example: msi-Package "A" is successfully deployed to most nodes but for some the message "file transfer failed" appears.
msi-Package "B,C,D" are successfully deployed to nodes where Package "A" fails.

Another case: Message "timeout" appears - in fact package has been successfully deployed (not really a problem)

Best regards.

Hi,

could you provide logs from problematic agents (preferably on high debug level, 5 or 6)?

Best regards,
Victor

]]>https://forum.netxms.org/post/31075https://forum.netxms.org/post/31075Tue, 22 Feb 2022 20:34:17 GMT<![CDATA[Reply to NetXMS 4.0 patch release 4.0.2157 on Tue, 22 Feb 2022 20:32:59 GMT]]>@lweidig said in NetXMS 4.0 patch release 4.0.2157:

The Ubuntu package for the agent does not include mysql.nsm subagent or any of the others, though only interested in mysql at this point.  I also installed the netxms-dbdrv-mariadb package (as the mysql package not available for Ubuntu 20) and it did not provide that either.

That's packaging issue, subagent itself can use mariadb driver, but seems that it is packaged only if mysql driver is selected. We will fix it for next release.

Best regards,
Victor

]]>https://forum.netxms.org/post/31074https://forum.netxms.org/post/31074Tue, 22 Feb 2022 20:32:59 GMT<![CDATA[Reply to NetXMS 4.0 patch release 4.0.2157 on Tue, 22 Feb 2022 20:29:13 GMT]]>@spheron said in NetXMS 4.0 patch release 4.0.2157:

Hello @all,

i fenced a problem too... If i select more then 16x DCI and choose Line Chart from the right click menu, the chart is not display correct. This bug i have in dashboards, too.

Bug is present since V4.0.2157.

Greetings
Marco

Hi,

actually charts does not support more than 16 items, and it was like this since very old versions.

Best regards,
Victor

]]>https://forum.netxms.org/post/31073https://forum.netxms.org/post/31073Tue, 22 Feb 2022 20:29:13 GMT<![CDATA[Reply to NetXMS 4.0 patch release 4.0.2157 on Tue, 22 Feb 2022 17:05:00 GMT]]>The Ubuntu package for the agent does not include mysql.nsm subagent or any of the others, though only interested in mysql at this point.  I also installed the netxms-dbdrv-mariadb package (as the mysql package not available for Ubuntu 20) and it did not provide that either.

]]>https://forum.netxms.org/post/31071https://forum.netxms.org/post/31071Tue, 22 Feb 2022 17:05:00 GMT<![CDATA[Reply to NetXMS 4.0 patch release 4.0.2157 on Tue, 22 Feb 2022 16:10:37 GMT]]>Hello @all,

i fenced a problem too... If i select more then 16x DCI and choose Line Chart from the right click menu, the chart is not display correct. This bug i have in dashboards, too.

Bug is present since V4.0.2157.

Greetings
Marco

]]>https://forum.netxms.org/post/31070https://forum.netxms.org/post/31070Tue, 22 Feb 2022 16:10:37 GMT<![CDATA[Reply to NetXMS 4.0 patch release 4.0.2157 on Tue, 22 Feb 2022 15:15:21 GMT]]>Hi!

I'm facing some problems with package deployment.

For example: msi-Package "A" is successfully deployed to most nodes but for some the message "file transfer failed" appears.
msi-Package "B,C,D" are successfully deployed to nodes where Package "A" fails.

Another case: Message "timeout" appears - in fact package has been successfully deployed (not really a problem)

Best regards.

]]>https://forum.netxms.org/post/31067https://forum.netxms.org/post/31067Tue, 22 Feb 2022 15:15:21 GMT