<![CDATA[Huawei switch - emty ports]]>We have some Huawei switches ( S5735-XXXX). They are discovered by NetXMS using GENERIC driver.
Interfaces tab looks good, but :

  • Ports tab is empty;
  • FDB tab shows MAC addresses for VLAN 1 only;
  • there is no port picture on VLANs tab.

Is there any solution or workaround for this problem ?

240718_113154_mstsc.png

240718_113337_mstsc.png

240718_113356_mstsc.png

240718_113418_mstsc.png

240718_113443_mstsc.png

]]>https://forum.netxms.org/topic/7980/huawei-switch-emty-portsRSS for NodeFri, 13 Nov 2026 09:34:59 GMTThu, 18 Jul 2024 08:37:20 GMT60<![CDATA[Reply to Huawei switch - emty ports on Wed, 25 Sep 2024 11:20:59 GMT]]>Great, thanks for the update

]]>https://forum.netxms.org/post/33839https://forum.netxms.org/post/33839Wed, 25 Sep 2024 11:20:59 GMT<![CDATA[Reply to Huawei switch - emty ports on Thu, 19 Sep 2024 10:21:25 GMT]]>@filipp-sudanov said in Huawei switch - emty ports:

@spheron said in Huawei switch - emty ports:

having here a similar problem with a Netgear GS728TPv3.

Any chances we can get remote access to your device for a few days? SNMP-only access is enough, it can be some test device not connected to real network

Hi Filipp,

sorry for the - very - late reply. Meanwhile Netgear released a new firmware with a vlan/snmp bugfix. After upgrade to newest switch firmware the VLAN infos in NetXMS are correct...

Greetings
Marco

]]>https://forum.netxms.org/post/33819https://forum.netxms.org/post/33819Thu, 19 Sep 2024 10:21:25 GMT<![CDATA[Reply to Huawei switch - emty ports on Tue, 13 Aug 2024 11:17:52 GMT]]>@spheron said in Huawei switch - emty ports:

having here a similar problem with a Netgear GS728TPv3.

Any chances we can get remote access to your device for a few days? SNMP-only access is enough, it can be some test device not connected to real network

]]>https://forum.netxms.org/post/33700https://forum.netxms.org/post/33700Tue, 13 Aug 2024 11:17:52 GMT<![CDATA[Reply to Huawei switch - emty ports on Tue, 13 Aug 2024 11:08:09 GMT]]>Hello @all,

having here a similar problem with a Netgear GS728TPv3.

Ports Tab ist empty, Interface List shows VLANs at wrong interface or VLAN fields are empty in interface List...

The correct values are:
VLAN1 is on port 1-18
VLAN2 is on port 19-24

NetXMS is using the GENRIC Driver.

Using here NetXMS V5.0.6 (Linux Debian / PostgreSQL)

Must i use a vendor driver for this switch type too?

Greetings
Marco 

 

interface.jpg

]]>https://forum.netxms.org/post/33699https://forum.netxms.org/post/33699Tue, 13 Aug 2024 11:08:09 GMT<![CDATA[Reply to Huawei switch - emty ports on Sun, 11 Aug 2024 18:45:17 GMT]]>+1 upvote for this vendor driver

]]>https://forum.netxms.org/post/33692https://forum.netxms.org/post/33692Sun, 11 Aug 2024 18:45:17 GMT<![CDATA[Reply to Huawei switch - emty ports on Wed, 24 Jul 2024 08:13:02 GMT]]>SNMP is enough for testing the driver.

]]>https://forum.netxms.org/post/33628https://forum.netxms.org/post/33628Wed, 24 Jul 2024 08:13:02 GMT<![CDATA[Reply to Huawei switch - emty ports on Wed, 24 Jul 2024 07:05:29 GMT]]>Hi,
What kind of remote access do you need - SNMP, CLI ?

]]>https://forum.netxms.org/post/33627https://forum.netxms.org/post/33627Wed, 24 Jul 2024 07:05:29 GMT<![CDATA[Reply to Huawei switch - emty ports on Mon, 22 Jul 2024 15:01:07 GMT]]>Hi,
Looks like it is required to create driver for this type of devices. I wander if it possible to get remote access to this device (this way it is much faster to create and debug new driver)?

]]>https://forum.netxms.org/post/33624https://forum.netxms.org/post/33624Mon, 22 Jul 2024 15:01:07 GMT