Currently you cannot change node status directly - if it is down, it will be critical. You can increase value of "poll count for status change" to 10 - then system will consider node as down only after 10 unsuccessful polls. Then you can setup ping to the node and trigger alarm of lesser severity after first ping loss. Best regards, Victor

Hi, NetXMS should fall back to ifTable automatically if ifXTable is not supported. You can forcibly disable by setting "Use ifXTable for interface polling" to "Disable" on "Polling" page in node properties. Best regards, Victor

You can use Ctrl+Insert / Shift+Insert in any text field. Problem is that RAP platform tries to handle Ctrl+C / Ctrl+V and so it is not working in text fields. I currently do not have a solution for making Ctrl+C / Ctrl+V work. Best regards, Victor

Hi again. I have mess in my configuration, can't be for 100?% sure in what order i create things. I setup repeating in threshold and it works great. I fix my configuration using your advice and it works! Problem SOLVED. Thx Victor!

It's Solaris 10.

Indeed. I see debug logs in the log file. Thank you. This is very helpful. Best regards, Marcin

Ok, now 'everything' is clear, I will migrate from local config files to a mix of server-config and agent policies. Thank you Tatjana. So the documentation will become better and better. But the way is still long thanks Dani

this is one of the errors: [15-Aug-2014 18:50:41.373] [ERROR] SQL query failed (Query = "INSERT INTO snmp_trap_log (trap_id,trap_timestamp,ip_addr,object_id,trap_oid,trap_varlist) VALUES (17210,1408121441,'172.30.108.252',109,'.1.3.6.1.4.1.9.9.171.2.0.2','.1.3.6.1.4.1.9.9.171.1.2.2.1.6.1.4.188.204.63.138.1.4.87.197.107.139.473 == ''¼Ì?''; .1.3.6.1.4.1.9.9.171.1.2.2.1.7.1.4.188.204.63.138.1.4.87.197.107.139.473 == ''WÅk''; .1.3.6.1.4.1.9.9.171.1.2.3.1.16.473 == ''8640000''; .1.3.6.1.4.1.9.9.171.1.4.2.1.1.2.473 == ''3''')"): You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near ''.1.3.6.1.4.1.9.9.171.1.2.2.1.6.1.4.188.204.63.138.1.4.87.197.107.139.473 == ''' at line 1 another error is: [15-Aug-2014 13:28:24.612] [ERROR] SQL query failed (Query = "UPDATE alarms SET alarm_state=0,ack_by=87686256,term_by=30541662,last_change_time=87686256,current_severity=0,repeat_count=0,hd_state        =0,hd_ref='`Ò',timeout=0,timeout_event=51,message='Ò',resolved_by=0, ack_timeout=0 WHERE alarm_id=49001504"): You have an error in your SQL syntax; check the manual that corresponds to your MySQL          server version for the right syntax to use near ''`' at line 1

hmm, seems to be an incident. I have deleted these DCI's and created them again. Now it is working fine. no idea what went wrong.

Hi @ll, this is my first post, so i just would like say many thanks at first for this community and programmer. I've some problems to create an availability chart in Business Service Section. Every time, when i try to apply the example script from documentation in script tab off a service object i get following error. "Internal error occured during: "Update Service check script". I think this error is responsible, why i didn't get the Chart. Many thanks in advance to all -------------------------------------------------------------------- Edit: I use the latest release 1.2.16 on Debian 7.0 (Wheezy) [image: Error_from_accept_script.PNG]

I think so but I'm not 100% certain (95

We have several clients that rely on IPsec VPN tunnels to and from our servers as well as their individual sites. I've created a method to monitor that the tunnel is up and passing traffic using the ping subagent. Essentially, I ping the internal ip of the remote side from the clients server in our datacenter. I'd like to have a dashboard that has a nice green / red indicator based on whether the remote side is up (IE, if the ping is below 10000 which is the subagent timeout value then indicate green otherwise indicate red. ) Any ideas or suggestions?

Hi! "Command generates output" option is not handler correctly yet for agent actions. Will fix this for next release. Best regards, Victor

Is there any way to get a list of what templates a node is in? GetNodeParents() doesnt return templates as node's parents, is there any other way? Thanks in advance

You have to select .1.3.6.1.4.1.9.9.13.1.3.1.2 (or any other working OID inside .1.3.6.1.4.1.9.9.13.1.3.1) as table's base OID, and use .1.3.6.1.4.1.9.9.13.1.3.1.2, .1.3.6.1.4.1.9.9.13.1.3.1.3, etc. for column OIDs. I've created short document with working SNMP table example: http://wiki.netxms.org/wiki/Creating_SNMP_table_DCI. Best regards, Victor

Yes, this patch fixes the database upgrade crash. Thanks!

thanks for the fast reply. I will correct the existing agents.

Hi! You can execute object tool via Java API or using nxshell (which is a Python wrapper around Java API). Approximate sequence will be following: find cluster object (by name or ID) for each child node object call NXCSession.executeAction Here you can find more information about API: http://wiki.netxms.org/wiki/Using_nxshell_to_automate_bulk_operations https://www.netxms.org/documentation/javadoc/latest/ Best regards, Victor

@user54119 said in Integer overflow after a transformation?: Try to set the data type of the DCI to "Integer 64 bit" and use this transformation script: return (int64($1) * 1024); That did the trick, thanks!

Thanks!