Makes sense to me. Thanks!

I'll dig further with my sysadmin. Thanks!

Here is some more information as to what I'm trying to accomplish. I am using NetXMS as an Event Management station. We're using it very well, in fact, and we're very happy with it. So far we are receiving events from our internal network via snmp trap and syslog, and I am also using nxevent to push custom events from other outside sources. When a trap is received from a node that netxms does not have in its configuration we even have automation to auto-create the node without snmp capabilities. Now we are being asked to receive events from external networks that have overlapping/conflicting ip networks (it's all private networking in the 192.168.0.0 range). For right or wrong there are conflicts beyond my control. I am thinking that using Zones might be the best way to do this (if there is a better method I'm not too proud to change my plans). So after going through the documentation it looks like I need to do a few things: Install a remote nxagent to act as a proxy Add the nxagent as a managed node in my primary netxms console Create a zone with the nxagent as proxy So I suppose my questions are thus: Do I send the traps for the new conflicting network devices to the nxagent or the console? Knowing that I will still need to create the node on the fly using CreateNode, is it possible to create the Node inside a specific zone? Thanks for the help!

There are no "test" button, but you can check it like this: add new rule to EPP, any (preferablty unsued) event will do - with action "send email", don't forget to save EPP send this event using command line tool "nxevent":nxevent -u admin -P adminpassword localhost SYS_NODE_DOWN P.S. replace "SYS_NODE_DOWN" with event you choose in step 1.

Bug fixed. Will be available in repack or in next release.

Hi, Without DBSchema it's working correctly. Probably the same bug was causing problems with DBencryptedPassword: https://www.netxms.org/forum/configuration/dbencryptedpassword-not-working-with-1-2-15/ Best regards, Marcin

Problem solved by removing one line: DBSchema = XXX from netxsmd.conf configuration file. Details are described in another thread: https://www.netxms.org/forum/general-support/nxdbmgr-dumps-core-files/

Hi! Not directly from console. However you can find image file on server and then edit and re-upload it. All image files stored in <prefix>\var\images on Windows or <prefix>/share/netxms/images on UNIX. File names are GUIDs and no extension. Best regards, Victor

Hi, I've sent you an email. I got web form notification, just a bit slow on response Best regards, Victor

I can confirm it's fixed in V1.2.15.

to point 1 (configuration of VPN connectors in JAVA console): Now there is a possibility to 'create' VPN connectors, but you can only specify a name of the connector and that's it. It's still not possible to configure the connector (peer node). In properties are only 'access control', 'comments', 'custom attributes' and 'status calculation'. So I still need the old console application. to point 2 (event correlation): The new parameter for SYS_NODE_UP is working as expected.

Sorry for the question spam, but another: What are the differences between the different types of Polls (Status, Config, etc...) Is there any documentation where I can see the differences between the Polls? I see where to configure timers on each Poll, (Server Configuration), but I still dont know what each poll does EDIT: Nevermind, found this one in the documentation.

There are no hardcoded limit for number targets. The only limit is system and network resources (sockets, memory, etc.) but 35 targets definitely should be no problem. Best regards, Victor

Thank you, will give a try.

@ytrasse said in SNMP Get disk free space: Hello andrey--k I tested your hdd-template. In general it seems to be ok. But there is no transforamtion script to display the values in GByte. So I decided to merge your hdd-template with filter and instances with my working transformation script (see above). But I had no real success, because it seems that {instance} is not allowed in transformation scripts. e.g. ...  oid = ".1.3.6.1.2.1.25.2.3.1.5." . {instance};  disksize = SNMPGetValue(transport,  oid);  // get Disk size I also created a template for getting the memory size/used/free/percent template similar to the disk templates. My calculation of free memory here is also not working. (Other calculations are working) transformation script: sub main() {   memused = GetDCIValueByName($node,(".1.3.6.1.2.1.25.2.3.1.6.".$1));   memsize = GetDCIValueByName($node,(".1.3.6.1.2.1.25.2.3.1.5.".$1));   memfree = (memsize - memused) * 64 / 1024;   return (memfree); } Attached there are my templates for Disk size/free/used/percent and Memory size/used/free/percent It would be nice if somebody could check what is wrong with my templates. Hi ytrasse, I have tried your transformation script and it's not working. Is there any updates?

Awesome Alex. Thank you very much. I'll migrate and post back. But seems easy and I guess there won't be problems. Also Just an update, The problem is solved following the steps from this post. http://techblog.dorogin.com/2011/05/sqliteexception-database-disk-image-is.html After re-creating my database that was 3.5GB, now it has 1.0Gb and pretty fast. I'll proceed with the database migration. Thanks again.

@user54119 said in Couldn't get correct value of the SNMP OID "memTotalFree": hostmib is supported by Windows SNMP server (OID: .1.3.6.1.2.1.25). You can have a look there,maybe you found something usefull. Try also .1.3.6.1.4.1.77 (but I don't have installed the mib) In .1.3.6.1.2.1.2 you find network related things. Try also DCI with Origin 'Windows Performance Counters', but no, this needs the agent  Thank you very much. I will learn these OIDs.

SNMP walk is an actual SNMP request which returns actual data. You cannot send request to template as it is just a configuration element. Best regards, Victor

We are currently using the Zabbix v2 system to monitor our infrastructure across an MPLS for 3 sites.  We have approximately 500 nodes that are being monitored and the system work pretty well and we have grown familiar with working with the system. A couple of weeks ago a friend of a friend had turned us on to the Netxms monitoring system (windows version).  And so far we like what we have seen thus far.  My question is.. A.  For anyone that was using Zabbix Monitoring system previously, Is it your opinion worth the conversion process? B.  Has anyone had experience converting the zabbix template and reports to be used for Netxms? C.  Has anyone used commercial support in the initial setup of a production system for Netxms?  The reporting function is very important, and I am seeing some issue's with the report generation in the windows version. Thanks in advance for any information you care to share... Ron.

Hi victor, i didn't get the chance to run one of the agents in debug mode but i have noticed that after a power failure or lost of communication to the server the agents changes their status either to "1" or just freeze and they do not restore their connection when the server is connected again. hope it will help you find something. Best Regards, Lindeamon