OK, thanks Victor will do. Regards, David

you can go into "general support" and download the template we have been sharing. you need to configure your equipment to send snmp traps and you need to create traps mappings and events.

 i just active SNMP on  my switch (alcatel-lucent)  plzz tel me if i did something wrong  bcz my server didn't detecte switch  FOR the switch 1  **  user NMSuserV3MD5DES md5+des password cisco ** 2  ** snmp station 199.199.100.200 162 NMSuserV3MD5DES v3 enable ** for the server netxms 1 ** active and passive** 2 ** default SNMP network  =public ** 3 ** 199.199.100.0/255.255.255.0 ** plzz help me

Hi! ports used for monitoring are following: udp 161 - SNMP requests - server sends request to port 161 on switch udp 162 - SNMP traps - switch sends traps to port 162 on server tcp 4700 - NetXMS agent - server connects  to remote host on port 4700 tcp 4701 - NetXMS management - management console connects to server port 4701 For SNMP devices you should use port 161 for requests going to device and 162 for traps going to server. Best regards, Victor

thankss a lott

db/listner - install an agent and create dci that monitors service state. alertlogs - you need to create an xml file {use the manual} that checks for the word error on the log file you want and send an event to the management server.on the server you need to create an event {use the manual} and an event processing rule. those are the guide line for you to start working.

thanks a lot bcz i study network and i didn't yet study SQL so i need to supervisor network in small company and i think netxms will help me a lot thanks again

package basic communication classes mainly 20120207172726.png

how to use netxms for monitoring acces point?

Hi there, How can you work with a particular method that is available through WMI, for example. Under the WMI tree of /root/default:StdRegProv is available, and it has methods such as GetBinaryValue.  In my case, the value i need would be under HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\CurrentVersion as Data under "DigitalProductId". How would you be able to construct a query using the WMIQuery feature in this type of situation ? Secondary question is, would it be possible gather all variables under a particular set of data as oppose to being very picky and input the variable name?  In other words, as with sql queries, why can't i just say WMIQuery(/root/CIMv2,SELECT * from Win32_UserAccount) and parse data accordingly, as oppose to WMIQuery(/root/CIMv2,SELECT * from Win32_UserAccount, Name).  Is there an operator such as "ALL" or "*" for the the substitution of the NAME that can be used to a similar effect ? I apologize if I am asking something that may be inherent in documentation but I haven't been able to locate it thus I figured I ask here. Thanks Samy

Thank you so much Victor, I appreciate the response.

my netxms log file is as per below.. i think it will be helpful for you.. [root@aaa-test netxms-1.0.13]# tail -f /var/log/netxms [06-Feb-2012 01:13:19] Item poller thread terminated [06-Feb-2012 01:13:19] Node poller thread terminated [06-Feb-2012 01:13:19] NetXMS Server stopped [06-Feb-2012 01:15:18] Log file opened [06-Feb-2012 01:15:18] Platform subagent "/usr/local/lib/libnsm_linux.so" successfully loaded [06-Feb-2012 01:15:18] Database driver "/usr/local/lib/libnxddr_sqlite.so" loaded and initialized successfully [06-Feb-2012 01:15:18] SQL query failed (Query = "SELECT var_value FROM metadata WHERE var_name='SchemaVersion'"): no such table: metadata [06-Feb-2012 01:15:18] SQL query failed (Query = "SELECT var_value FROM config WHERE var_name='DBFormatVersion'"): no such table: config [06-Feb-2012 01:15:18] Your database has format version -1, but server is compiled for version 105

Hi! You mean high availability for NetXMS server itslef? You can check this topic: https://www.netxms.org/forum/configuration/netxms-in-a-cluster-mode/ for one possible approach to run NetXMS server in active-standby cluster. Best regards, Victor

in English please

Hi. In a linux environment ExternalParameter return a incorrect value by using sudo. For example, for this agent's configuration: ExternalParameter = with_sudo:/usr/bin/sudo echo 111 ExternalParameter = without_sudo:echo 111 I attach ​​return values, one OK and one wrong. Best regards sudo.png

Hi! Yes, it's actually a bug. There should be retention time for alarms. I'll add it to bug list. Currently, you can safely delete terminated alarms while NetXMS server is running. You can do it like this: DELETE FROM alarms WHERE alarm_state=2 AND last_change_time<(timestamp here) We use UNIX timestamp (seconds since 01.01.1970 00:00:00 UTC). Best regards, Victor

Hi Victor, I think I'll wait for the next release. Thanks for clarifying. Regards, Dan

hi victor, the whole thing is too risky. i have exported everything i could using the old console and what i could not export i am going to leave in the exported file. in the new server i will open the DB and copy/paste the values,it seems more safe this way. we have to have a normal and easy way to export everything we have created. Best Regards, Lindeamon

Any news about this? Could we be close to getting a rpm package? Best regards.

check groups and permissions to the new user.