Комманда в ExternalParameter

[VladimirV]

Комманда в ExternalParameter выполняется не полностью.
Сервер и агент v2.0.5
Лог агента:

[26-Aug-2016 14:36:57.729] [DEBUG] [session:0] Received message CMD_GET_PARAMETER
[26-Aug-2016 14:36:57.729] [DEBUG] [session:0] Requesting parameter "RAIDControllerStatus"
[26-Aug-2016 14:36:57.730] [DEBUG] H_ExternalParameter called for "RAIDControllerStatus" "E"C:\Program Files\Adaptec\Adaptec Storage Manager\arcconf.exe" getconfig 1 ad | find /C "Optimal""
[26-Aug-2016 14:36:57.730] [DEBUG] RunExternal called for "RAIDControllerStatus" "E"C:\Program Files\Adaptec\Adaptec Storage Manager\arcconf.exe" getconfig 1 ad | find /C "Optimal""
[26-Aug-2016 14:36:57.730] [DEBUG] RunExternal: command line is ""C:\Program Files\Adaptec\Adaptec Storage Manager\arcconf.exe" getconfig 1 ad | find /C "Optimal""
[26-Aug-2016 14:36:58.624] [DEBUG] [session:0] GetParameterValue(): result is 0 (SUCCESS)
[26-Aug-2016 14:36:58.624] [DEBUG] [session:0] Sending message CMD_REQUEST_COMPLETED (size 88)
[26-Aug-2016 14:36:58.624] [DEBUG] [session:0] Outgoing message dump:
  ** 001D0008000000580000005E00000002
  ** 0000001C000000000000000000000000
  ** 0000001501000000000000280043006F
  ** 006E00740072006F006C006C00650072
  ** 007300200066006F0075006E0064003A
  ** 0020003100000000
  ** code=0x001D (CMD_REQUEST_COMPLETED) flags=0x0008 id=94 size=88 numFields=2
  ** [    28] INT32    0
  ** [    21] STRING   "Controllers found: 1"

Вывод комманды в консоли:

C:\>"C:\Program Files\Adaptec\Adaptec Storage Manager\arcconf.exe" getconfig 1 ad | find /c "Optimal"
1

Вывод первой комманды:

C:\>"C:\Program Files\Adaptec\Adaptec Storage Manager\arcconf.exe" getconfig 1 ad
Controllers found: 1
----------------------------------------------------------------------
Controller information
----------------------------------------------------------------------
   Controller Status                        : Optimal
   Channel description                      : SAS/SATA
   Controller Model                         : Adaptec 4800SAS
   Controller Serial Number                 : 7C2710E1D59
   Physical Slot                            : Unknown
   Temperature                              : 40 C/ 104 F (Normal)
   Installed memory                         : 256 MB
   Copyback                                 : Disabled
   Background consistency check             : Disabled
   Automatic Failover                       : Enabled
   Defunct disk drive count                 : 0
   Logical devices/Failed/Degraded          : 4/0/0
   --------------------------------------------------------
   Controller Version Information
   --------------------------------------------------------
   BIOS                                     : 5.2-0 (11564)
   Firmware                                 : 5.2-0 (11564)
   Driver                                   : 5.2-0 (16119)
   Boot Flash                               : 5.2-0 (11564)
   --------------------------------------------------------
   Controller Battery Information
   --------------------------------------------------------
   Status                                   : Not Installed


Command completed successfully.

Часть конфиг агента:

DebugLevel = 9
ExecTimeout = 10000
ExternalParameter = RAIDControllerStatus:"C:\Program Files\Adaptec\Adaptec Storage Manager\arcconf.exe" getconfig 1 ad | find /C "Optimal"

[kozlov_ao]

Насколько я помню, arcconf долго отрабатывает. Если это так, лучше использовать ExternalParametersProvider.
Увеличением тайм-аута тут уже не обойтись.

[VladimirV]

Субьектвно, он отрабатывает не более 2 секунд.
Через ExternalParametersProvider работает, придется использовать.