Excellent Victor, thanks for your support After making the changes suggested by you, I could see approriate log messages in both agent log and server log Agent log: [06-Aug-2015 23:59:32.636] [DEBUG] [session:0] GetTableValue(): result is 0 (SUCCESS) [06-Aug-2015 23:59:32.637] [DEBUG] [session:0] Sending message CMD_REQUEST_COMPLETED (size 2880) [06-Aug-2015 23:59:33.055] [DEBUG] LogParser: new data avialable in file "/apps/uspsqa1/switch/site/log/sys/SunOSsyslg.log" [06-Aug-2015 23:59:33.055] [DEBUG] SendTrap(): event_code=0, event_name=IST_SYSLG1_RECORD, num_args=1, arg[0]="fatal error" arg[1]="(null)" arg[2]="(null)" [06-Aug-2015 23:59:33.055] [DEBUG] [session:0] Sending message CMD_TRAP (size 144) Server log: g-2015 23:59:06.692] [DEBUG] StatusPoll(s1): bAllDown=false, dynFlags=0x00000001 [06-Aug-2015 23:59:06.694] [DEBUG] StatusPoll(s1 [112]): boot time set to 1438269511 from agent [06-Aug-2015 23:59:06.695] [DEBUG] Finished status poll for node s1 (ID: 112) [06-Aug-2015 23:59:33.056] [DEBUG] AgentConnectionEx::onTrap(): Received trap message from agent at 10.80.226.33, node ID 112 [06-Aug-2015 23:59:33.056] [DEBUG] AgentConnectionEx::onTrap(): trapID is valid [06-Aug-2015 23:59:33.056] [DEBUG] Event from trap: 100066 [06-Aug-2015 23:59:33.056] [DEBUG] CorrelateEvent: event IST_SYSLG1_RECORD id 44 source s1 [112] [06-Aug-2015 23:59:33.056] [DEBUG] CorrelateEvent: finished, rootId=0 [06-Aug-2015 23:59:33.056] [DEBUG] EVENT 100066 (ID:44 F:0x0001 S:0 TAG:"") FROM s1: fatal error [06-Aug-2015 23:59:33.057] [DEBUG] Event 44 match EPP rule 27 [06-Aug-2015 23:59:46.486] [DEBUG] Updating maps... Also could see event being logged in event_log table Regards Naga

Good solution  :).  While we have this option, we don't need to execute a command on server or execute action in NXSL. Thank you.

I am trying to create template for getting wireless informations from mikrotik devices such as signal, Rx, Tx, DataRate and so on. Problem is that on each device the oid is different based on MAC address of the wireless card. the main part .1.3.6.1.4.1.14988.1.1.1.2.1.3 is same but continuing differ on one it is .1.3.6.1.4.1.14988.1.1.1.2.1.3.0.12.66.44.246.252.4 on different .1.3.6.1.4.1.14988.1.1.1.2.1.3.0.12.66.43.64.78.4 I foud in wiki solution for stable version https://wiki.netxms.org/wiki/Creating_SNMP_table_DCI but I am not able to find how to do this in Development Version I found some information it should be done through object tool but there is Snmp table no more Thanks for answer

it sent only one sms. When i try to send next, in log is [image: sms.PNG]

No, it's not possible. You can, however, configure it in slightly different way: Create nodes: server1 (physical server, with correct IP) IIS (node without IP address) SQL Server (node without IP address) In server1 properties, add IIS and "SQL Server" to trusted nodes list Create corresponding DCIs on IIS and "SQL Server", for each one of them set "proxy node" (in DCI configuration, not in node configuration) to "server1". This was DCIs will be collected on server1, but will be shown on IIS or SQL Server (same goes for alarms, etc.) Then you can have multiple rules in EPP for IIS and SQL Server nodes.

Actually, there is a flaw in the logic of status poll. When there are no SNMP or NetXMS agent ob the node, server relies only on ICMP pings of interfaces. If all interfaces are down, node is considered down. Problem is that status poller checks status of interfaces, so interfaces with expected state set to ignore are effectively excluded from status calculation. Probably most correct solution would be to use interface operational state instead of status for determining if all interfaces are down. Best regards, Victor

Hi, event if connection is not closed properly connection limit is way bigger than 2. What is in server log (on debug level 6 or higher) when you try to connect for 3rd time? Best regards, Victor

Issue with "No value" on Network Map, when added to Dashboard fixed. https://dev.raden.solutions/issues/866 Will be added to next release.

Worked perfectly. Thank you multix!

thank you so much, i installed tomcat7 it works!!!!! Thank you really appreciate your help.

Another goal I want to realize is the follow: I have a server that collect info from the network (I use it for archiving and other operation like this): it's a generic home-made server, it isn't netxms. The server is able to receive a flow of data through udp or tcp stream, then it parse the data. I want to forward the event from netxms to this server...My question is: Can i use the action "forward events" for realize comunication between netxms and my server? Is there another way to forward event from netxms to the archive server? Thank you for the answer!

Hi, thanks for the quick response. It just happened again. But resetting the Workspace did not help. The client shows up correct again just by removing the folder ~/.nxmc/ and starting it again. So I compared the settings-files in the good ~/.nxmc/data/ folder and the bad, and found the problem: In the file ~/.nxmc/data/.metadata/.plugins/org.netxms.ui.eclipse.objectview/dialog_settings.xml following entries were set to 0: <item value="0" key="InterfaceTable.V2.18.width"/> <item value="0" key="InterfaceTable.V2.16.width"/> <item value="0" key="InterfaceTable.V2.15.width"/> <item value="0" key="NodeTable.6.width"/> After I was setting a value greater 0 the columns appeared again. So I suppose that depending on what node I am watching by the time closing the client, these values are written in the settings file. Manfred

Hi I need to change tooltip of object ( in my case node) that has been added to map I need to change tooltip based on status value of object. Regards Naga

Just few clarifications: load will not exceed size, bt it can exceed max size, as thread pool will not grow beyound max size. Note that parameter name for load monitoring is "LoadAverage", not "Load", as it represents moving average of request queue for period (same as UNIX/Linux load average), while "Load" represents current thread pool load as % of threads processing request to current size of thread pool. Also, I've updated internal DCI selector in UI - now it shows correct set of parameters. Best regards, Victor

Hi Victor, worked like a charm Best Regards, Lindeamon

Hi! Finally I remove java 1.7 and install java 1.8 with Tomcat 7 and webapp it's ok! Thanks and regards,

Hi, i'm currently working on a nxshell script to import a large number of nodes. This works fine so far, but I have a problem with set the image of the node. flags = NXCObjectCreationData.CF_DISABLE_NXCP containerId = 2 name = "Node1" ip = "0.0.0.0" node = session.findObjectByName("Node2") cd = NXCObjectCreationData(objects.GenericObject.OBJECT_NODE, name, containerId); cd.setCreationFlags(flags); cd.setPrimaryName(ip) nodeId = session.createObject(cd) session.setObjectManaged(nodeId, False) print '"%s" created (IP: %s)' % (name, ip) md = NXCObjectModificationData(nodeId) md.setImage(node.image) session.modifyObject(md) Traceback (most recent call last): File "<stdin>", line 13, in <module> TypeError: setImage(): 1st arg can't be coerced to java.util.UUID The node i'm refering to has an image set and I can print the UUID. Any ideas why setting images is not working?

I think you are confusing a few things here. application logs (nxagentd or netxmsd) are NOT syslog You can read up on syslog here http://www.networkmanagementsoftware.com/what-is-syslog Application logs (nxagentd or netxmsd) are written as configured in the (nxagentd or netxmsd) conf files. Syslog messages can be sent from any of your devices to NetXMS syslog server. You can of course direct the application logs to be sent over syslog as well (using the {syslog} setting), but correct syslog deamon configuration on your Linux box is needed. On Windows, {syslog} means to use the Windows System Log - which is not syslog at all.

Sources are available in out GIT: http://git.netxms.org/public/netxms.git Checkout by tag release-2.0-M5. Desktop UI sources are located in src/java/netxms-eclipse Here is a list of required components you need to install into eclipse: http://git.netxms.org/public/netxms.git/blob/refs/heads/develop:/src/java/eclipse_addons.txt?js=1

Deleting old instances and compiling new one solved the Problem. Thanks.