SMS config

[praim]

/opt/netxms doesn't exist. But when I try to find in root director, can't find somenthing like "libnxsms_generic"

[alk]

/opt/netxms is just an example from my system.
Try find / -name libnxsms_generic\*

[praim]

Thank you, so i find /usr/lib/libnxsms_generic.so when I take this in SMSDriver, I can see in the log "failed to open port" Is it problem with /dev/ttyUSB2?

Thank you

[alk]

Yes, server can't open /dev/ttyUSB2 for some reason.

You can check port using "screen" command (if you have it installed):screen /dev/ttyUSB2 9600
Press enter couple of times, try to enter "AT" and press enter – you should get reply from modem.

[praim]

Ok here is screen command

---

[alk]

I'm pretty much sure that you use wrong port. Most USB modems provide multiple ports – one for communications, one for diagnostic messages, and one or two for other purposes. Looks like you are using diagnostic port. Try other /dev/ttyUSB* ports with screen – it should respond to "ATI" command with modem information (vendor, model, etc.)

[praim]

yes, this modem have 3 ports. But now i start server and use ttyUSB2 and sms was send. I don't now how, but problem is solved :). Thank you very much for your help. And when i post in "screen" command "ATI" it show me model, imei etc.

So thank you.

[praim]

so error again, but in log is:" ReadToOK: read to mark returned -1"

[alk]

That's not an error, just diagnostics. Try to send one more message to verify that it works.

[praim]

it sent only one sms. When i try to send next, in log is

---