Tried it today and it worked. Thanks for that. But I would vote for an additional flag where I can say "Apply custom attribute on linked nodes". Would be great if it could be set per attribute. Thanks, VMGuy

@flanky said in Using Network Service to check if Webservcer is running: Marco unfortunatelly your suggestion didn't work... Perhaps i have configured something in a wrong way? That is the way I use to monitor my web server! I'm using it since a lot of time, I don't remember any other steps to do, I'm sorry! Best regards, Marco

Thank you Alex.This helped me.

Yes, upgrade procedure is the same - you just run nxdbmgr as usual and it will make necessary changes in DB. Best regards, Victor

Replace "{instance}" in DCI configuration with actual mount point (e.g. "/home" on Unix or "C:" on Windows) Another option is to setup instance discovery: https://www.youtube.com/watch?v=HSs9mP_0XK0

Hi! In Last Values for cluster you will see only those DCIs that are marked for aggregation (see Cluster property page of DCI) - and for them you'll see aggregated value (for example, average COU usage for cluster nodes). Yes, it's not implemented yet. Yes, it will be published soon. It is in my short TODO list. Agree. Cluster DCI configuration works like a template that is applied to all cluster nodes. So any DCI without resource association will be collected on each node. Currently it's not possible to create template with cluster resource binding. I'll think how it could be implemented. Interfaces on cluster nodes with addresses belonging to cluster networks excluded from network topology. It is quite common setup when multiple clusters has identical IP addresses on interconnect links. Best regards, Victor

Wow, I don't know how many times I have looked at Server Configuration, and overlooked that parameter. Thanks; Terry

Sorry, but it's not fixed yet. It's registered as issue #735

It looks like Kyocera have some issues with SNMP implementation on this MFU. You can check that with snmpwalk: ifAdminStatus (1 - up, 2 - down, 3 - testing): nxsnmpwalk -c public TARGET_IP .1.3.6.1.2.1.2.2.1.7 ifOperStatus (1 - up, 2 - down, 3 - testing, 4 - unknown, 5 - dormant, 6 - notPresent, 7 - lowerLayerDown): nxsnmpwalk -c public TARGET_IP .1.3.6.1.2.1.2.2.1.8

I also noticed hang during upgrade 1.2.16 to 1.2.17. Mentioned here: https://www.netxms.org/forum/general-support/error-while-upgrading-to-1-2-17/msg15173/#msg15173 Regards, Grzegorz.

ok, thank you tomaskir!

Thank you for your fast reply! 

While your solution fixed my problem for the Cisco 2960S switches, my Cisco 4900M switch (which identifies itself as a 4500 series switch still uses a generic driver. The Object ID=.1.3.6.1.4.1.9.1.917 I assume that the detection logic isn't aware of this switch.  Is there a way of tricking NetXMS into thinking it is another switch that is supported to see if it works?  This is the software I'm running on the switch: System Description=Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500e-IPBASEK9-M), Version 12.2(53)SG9, RELEASE SOFTWARE (fc2) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2013 by Cisco Systems, Inc. Compiled Tue 29-Jan-13 03:04 by p I have two of these switches at the core of my network (they are 10GBit switches).  It would be nice if NetXMS recognized them. Let me know if there is anything I can provide that would help. Thanks in advance.

We have a same need that basically to import monitoring data from other data source that does not have SNMP agent.  The data will be fed to NetXMS server for reporting/monitoring purpose.  Data format may look like following: Jan 06 01:22:45 DataReceived 12kb Jan 06 01:22:46 DataSent 3kb Jan 06 01:23:40 DataReceived 12.5kb Jan 06 01:23:41 DataSent 3.6kb Any suggestion from you all that import these and report from NetXMS will be appreciated.

I'm using the Oracle Instant Client 12.1 x64. It's the only one installed. The sqlplus connects fine with TNS. Best regards, Manuel

develop version v2.0 dont have this bug, so i mix some code from v2.0 to 1.2.17 for fastfix replace method private void sendFileData(final long requestId, final byte[] data) in src\java\nxreporting\src\main\java\com\radensolutions\reporting\infrastructure\impl\TcpConnector.java with /** * @param requestId * @param data * @throws IOException */ private void sendFileData(final long requestId, final byte[] data) throws IOException { NXCPMessage msg = new NXCPMessage(NXCPCodes.CMD_FILE_DATA, requestId); msg.setBinaryMessage(true); boolean success = false; for (int pos = 0; pos < data.length; pos += 16384) { int len = Math.min(16384, data.length - pos); msg.setBinaryData(Arrays.copyOfRange(data, pos, pos + len)); sendMessage(msg); if (pos + len == data.length ) { success = true; break; } } if (success) { msg.setEndOfFile(true); msg.setBinaryData(new byte[0]); sendMessage(msg); } else { NXCPMessage abortMessage = new NXCPMessage(NXCPCodes.CMD_ABORT_FILE_TRANSFER, requestId); abortMessage.setBinaryMessage(true); sendMessage(abortMessage); } }

I was able to solve this error by setting export CPPFLAGS="-march=i486" before the ./configure looks the default for xenserver is set to i386.....

Thank's for your Support. I must install the Client, not the Agent!

It's still on my screen as result of the select statement before I deleted it. It was a copy of a script I found in this forum and I started playing around with it. |    10001 | Acronis_Backup_Trap    | sub main() {     switch($event->parameters[1]) {       case "Unkown":         evt = "ACRONIS_BACKUP_UNKOWN";         break;       case "Information"         evt = "ACRONIS_BACKUP_INFO";         break;       case "Warning"         evt = "ACRONIS_BACKUP_WARNING";         break;       case "Error"         evt = "ACRONIS_BACKUP_ERROR";         break;       default:         evt = "ACRONIS_BACKUP_INFO";         break;     }     PostEvent($node, evt, null, $event->parameters[1]);  // pass message as first parameter to generated event   } else {     PostEvent($node, "ACRONIS_BACKUP_CLOSE");   } }

You can turn on "Exclude from topology" option for problematic interfaces - then NetXMS server will not create matching subnets. Best regards, Victor