Eth0 - Admin State UP and Oper State Down - Link working fine
-
Hi everyone,
I am quite new to snmp and NetXMS. However, I must say that it's great.I am monitoring a total of 12 switches and 6 network printer with no problems whatsoever.
Until, today my boss got a TASKalfa 3010i MFP. I configured it on the network, printed, scanned to emails and working like a charm will all 80 employees.
When I configure the MFP with NetXMS, I am having problems with the Ethernet port that was discovered with the printer (eth0) - the ONLY one available and present in it.
Eth0 is showing as Admin status UP and Operational status DOWN.
How can this be as the network connection is fine, without a single error and everyone is printing normally? I can ping the printer, access it's webpage, etc.
Can please someone drop me some ideas?
Thanks a lot in advance
-
It looks like Kyocera have some issues with SNMP implementation on this MFU.
You can check that with snmpwalk:ifAdminStatus (1 - up, 2 - down, 3 - testing):
nxsnmpwalk -c public TARGET_IP .1.3.6.1.2.1.2.2.1.7ifOperStatus (1 - up, 2 - down, 3 - testing, 4 - unknown, 5 - dormant, 6 - notPresent, 7 - lowerLayerDown):
nxsnmpwalk -c public TARGET_IP .1.3.6.1.2.1.2.2.1.8
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login