Hi! "Entire Network" and "All Services" are two different subtrees. Network tree created and maintained automatically based on IP topology - nodes belongs to subnet objects according to IP addresses configured on it. In service tree, you can organize objects in a logical hierarchy. You cannot move node from subnet - you can only move it between two containers in service tree. If you need to place node in container in service tree you should use "Bind" operation - select container, right click on it, select Bind, and select node(s) you wish to place into this container. Best regards, Victor

Thanks a lot.

Thank you, Victor. My mother language is Chinese, so if you need Chinese translation, i would like to finish it(my email: [email protected]) . Best Regards

I looked at the documentation and apparently I can't seem to follow along to correctly set up a Windows Event Log monitoring process.  I was wondering if someone could walk me thru setting up a monitor for Event ID 538 in the Security log. I don't know if it makes a difference but it is for Windows 2008 R2 and 2003 servers.  I am using 1.0.10 console and clients. Thanks in advance.

Hi! Please, could you tell me why Icmp.LastPingTime and Icmp.AvgPingTime parameters return response times don't match with ping command? This is the output for linux ping command: [root@NetFlow1 ~]# ping -v -i 10 10.45.252.62 PING 10.45.252.62 (10.45.252.62) 56(84) bytes of data. 64 bytes from 10.45.252.62: icmp_seq=1 ttl=250 time=75.7 ms 64 bytes from 10.45.252.62: icmp_seq=2 ttl=250 time=76.7 ms 64 bytes from 10.45.252.62: icmp_seq=3 ttl=250 time=81.9 ms 64 bytes from 10.45.252.62: icmp_seq=4 ttl=250 time=81.8 ms 64 bytes from 10.45.252.62: icmp_seq=5 ttl=250 time=80.9 ms 64 bytes from 10.45.252.62: icmp_seq=6 ttl=250 time=81.6 ms 64 bytes from 10.45.252.62: icmp_seq=7 ttl=250 time=82.1 ms 64 bytes from 10.45.252.62: icmp_seq=8 ttl=250 time=81.1 ms 64 bytes from 10.45.252.62: icmp_seq=9 ttl=250 time=76.7 ms 64 bytes from 10.45.252.62: icmp_seq=10 ttl=250 time=81.8 ms 64 bytes from 10.45.252.62: icmp_seq=11 ttl=250 time=81.9 ms 64 bytes from 10.45.252.62: icmp_seq=12 ttl=250 time=81.4 ms 64 bytes from 10.45.252.62: icmp_seq=13 ttl=250 time=81.8 ms 64 bytes from 10.45.252.62: icmp_seq=14 ttl=250 time=76.3 ms 64 bytes from 10.45.252.62: icmp_seq=15 ttl=250 time=81.4 ms 64 bytes from 10.45.252.62: icmp_seq=16 ttl=250 time=82.1 ms 64 bytes from 10.45.252.62: icmp_seq=17 ttl=250 time=76.5 ms 64 bytes from 10.45.252.62: icmp_seq=18 ttl=250 time=76.7 ms 64 bytes from 10.45.252.62: icmp_seq=19 ttl=250 time=76.3 ms 64 bytes from 10.45.252.62: icmp_seq=20 ttl=250 time=82.6 ms 64 bytes from 10.45.252.62: icmp_seq=21 ttl=250 time=77.0 ms Attached image wich Icmp.AvgPingTime and Icmp.LastPingTime delivers at the same time. Seems that divide it by 10 and then round value. Best regards. LastPingTime_AvgPingTime.png

Fixed. Thanks for reporting! Best regards, Victor

thank you, victor.

Hi! Object Details tab: in larges system description nodes, Capabilities box is lost . Wrap string should be applied to General box. Perhaps Capabilities box would be under General box. Best regards. LargeSystemDescription.png

Hi Victor, Of course, by using two or more conditions!. I would have never come to mind :-[. Now, desired container status work fine. Thank you very much again.

Just to follow up, that was exactly it.  Interesting behavior observed for others who may be searching: I had intermittent up/downs (false positives) as well as sometimes when I would look at the switch it would show me the management servers interfaces and others it would show the switch. Thanks for taking a look!

@victor said in Access denied when using nxpush: No. But why you need that? I was trying to run a conditional report and SSRS data-driven subscriptions weren't working out for me. Now I've sorted it out, thanks for your help!

ok! thanks!

Nevermind. I had reconfigure the right server

and is there at least a way to export a DCI ? in order to load in a third party application which generates reports. thanks for your help sebastien

Hi, I have installed NetXMS onto windows server 2003 with SQL server 2005 SP2.  When I attempt to start the service I get the error 1053: The service did not respond to start or control request in a timely fashion. However when I start netxmsd from the command line the server runs and I can connect to it from the console. Attached is the log file showing first the command line start followed by 2 attempts at starting the service. Any help would be great Thanks Mark. netxms.zip

Now all work fine. Great, fast and perfect reply (as always), your support pokes out in the eyes from commercial products... I will sent .rar mibs for Fortinet firewalls and HP Procurve switches. Thx FortinetFirewallsMibs.rar HPProcurveSwitchesMibs.rar

Hi Victor, Whats the solution to this problem, I am using PSQL as database and have same sort of issue. Below are the error logs. C:\Documents and Settings\PMACC\Application Data\NetXMS Console\nxcon-3076-1298349958.mdmp NETXMS CONSOLE CRASH DUMP Tue Feb 22 10:15:58 2011 EXCEPTION: C0000005 (Access violation) at 10006BE8 NetXMS Console Version: 1.0.10 OS Version: Windows Server 2003 Build 3790 Service Pack 2 Processor architecture: Intel x86 Register information:   eax=00000000  ebx=00000000  ecx=0140FD38  edx=00000000   esi=00000000  edi=7739C2EE  ebp=012A0168  esp=0140FD14   cs=001B  ds=0023  es=0023  ss=0023  fs=003B  gs=0000  flags=00010206 Call stack:   [libnxclw:C:\Source\NetXMS-1.0.x\src\libnxcl\main.cpp:118]: NXCGetServerID   [nxcon:C:\Source\NetXMS-1.0.x\src\console\win32\comm.cpp:231]: LoginThread   [nxcon:C:\Source\NetXMS-1.0.x\src\console\win32\comm.cpp:379]: LoginThreadStarter   [kernel32:77E64829]: GetModuleHandleA

Hello, I've added some of the ASP.NET WinPerf counters to an agent.  Here are the entries in the config file: *WinPerf Counter = ASP.NET.Requests.Rejected:"\ASP.NET\Requests Rejected":60:A:INT:ASP.NET Requests Rejected total Counter = ASP.NET.Requests.Current:"\ASP.NET\Requests Current":60:A:INT:ASP.NET Requests Current total Counter = ASP.NET.Requests.Disconnected:"\ASP.NET\Requests Disconnected":60:A:INT:ASP.NET Requests Disconnected total Counter = ASP.NET.Requests.Queued:"\ASP.NET\Requests Queued":60:A:INT:ASP.NET Requests Queued total Counter = ASP.NET.Applications.Running:"\ASP.NET\Applications Running":60:A:INT:ASP.NET Applications Running over past minute Counter = ASP.NET.Request.Execution.Time:"\ASP.NET\Request Execution Time":60:A:INT:ASP.NET Request Execution Time over past minute Counter = ASP.NET.Error.Events.Raised:"\ASP.NET\Error Events Raised":60:A:INT:ASP.NET Error Events Raised total Counter = ASP.NET.Application.Restarts:"\ASP.NET\Application Restarts":60:A:INT:ASP.NET Application Restarts total Counter = ASP.NET.Worker.Process.Restarts:"\ASP.NET\Worker Process Restarts":60:A:INT:ASP.NET Worker Process Restarts over past minute Counter = ASP.NET.Worker.Processes.Running:"\ASP.NET\Worker Processes Running":60:A:INT:ASP.NET Worker Processes Running over past minute Counter = ASP.NET.App.Errors.Total:"\ASP.NET Applications\Errors Total":60:A:INT:ASP.NET App Errors Total After I refresh my configuration, all of the \ASP.NET\ counters appear in the supported agent parameters list, but the \ASP.NET Applications\ one doesn't. What could I be doing wrong here? I'm using 1.0.5 agent and server.

Hi Gents,   I am having an netxms 1.0.10 server installed on RHEL 6. My problem is, I am not able to see any traps received by  trap reciever. I even enables the logSNMPtraps option but no luck. Anybody faced this kind of problem before? Any suggestions. i tried sending traps to the server using the snmptrap command. But No luck. I am sending the trap from a device which is in the same lan, so there are no firewalls involved.

Event Groups Sample -- Too big for original post. Event Groups.jpg