Thank you. I was probably blind that I didn't find it.

Please note this is the same issue as https://www.netxms.org/forum/general-support/problem-with-network-l2-map/msg26186/#msg26186 and similar to https://www.netxms.org/forum/general-support/l2-map-save-layout/msg23165/#msg23165. however these are rather old posts so I wanted to open a new one. such that after generating a layer 2 topology map with automatic layout, I then disable automatic layout and place all the nodes neatly into logical positions for the team, however after a certain amount of time they loose their location and re-appear at the top left hand corner. I understand this is due to the server loosing topology information however the devices do not change after they are picked back up so I would like them to go back to the same spots. This wold save me either having to re-move around 10-20 nodes on around 20 maps every couple of days, or re-making every map statically and having to update it manually (Which is prone to human error). Is there a way around this or should I move it to Feature Requests? Thanks in Advance

Dear NetXMS Community we use syslog parser to generate network device error events immediately on expression match. However, some syslog errors comes every second and only the first error message have to generate the event immediately and all further errors that comes to the same device for the next three hours have to be ignored. The problem is that we don´t want to wait 3 hours or 20 of the syslog errors, it must generated with the first match and after this syslog parser have to ignore the following errors for the next 3 hours. How we have to use the match attributes "repeat Count", "repeatInterval" and "reset" to solve this? Any ideas? thanks in advance

Thanks a lot for the answer. You saved me 1000 useless emails  ;D ;D

You can check the list of published packages in package repository, e.g. for Ubuntu Focal Fossa: https://packages.netxms.org/ubuntu/pool/focal/main/n/netxms/ Currently it's 3.6.300 Make sure you run apt update prior to apt upgrade

On startup netxms management console downloads netxms.mib file from server (or if it's already downloaded, checks, if it needs downloading again). As a workaround you can set "Connection over slow network" checkbox on console's login screen - it will omit mib file downloading. Or you can try to copy /var/lib/netxms/netxms.mib  file from server and putting it in ~/.nxmc/data folder, but I am not sure it that will work. How fast is your network connection from your desktop to NetXMS server? What are OSes on the server and your desktop? Is your netxms console the most recent version?

Hi, Has this functionality been added to 3.x line? Thanks.

Hí, Filipp. I got it. Thanks !

Service check is performing the checks via NetXMS agent that is installed on NetXMS server. The agent should have portcheck subagent enabled. But overall service check functionality is old and is not being developed. It's recommended to use netsvc subagent, which is based on curl. It provides Service.Check(URL[, regex]) agent parameter. Here's some information: https://www.netxms.org/documentation/adminguide/service-monitoring.html#netsvc-configuration

We likely have found the bug that caused this issue. It should be fixed tomorrow and we will publish patch release. Best regards, Victor

Thanks for the support. Yes the process is running when I try to connect. The OS is Ubuntu 20.10 with 5.8.0-29-generic kernel. Here the files in /tmp. Thanks in advance, I really appreciate. Roberto netxmsd-threads.11072.20201201-175119 netxmsd-threads.11072.20201201-175215 netxmsd-threads.11072.20201201-175332

Netxms Version 3.6.264 SNMP version 2 Interfaces are showing fine however no ports are showing on the ports tab. Screen shot of device details included let me know if more information is required. [image: CaptureC9330-48P.PNG]

Hi, performance tab populated by DCIs that are marked as "show on performance tab". Mark some DCIs as such and you should see charts for them. Physical links should be entered manually, you can right click in any physical link list and select "create new". Ports are shown when there is device driver for your switch or router that can provide information on what interfaces are actually physical ports and how they are located on device. Best regards, Victor

Hi, automatic maps only include nodes, you can only build custom map with containers manually. Best regards, Victor

HI, Victor. I appreciate your help. I did it. Everything is Ok. Thanks !

Working like a charm, thank you very much. 🥳🥳🥳🥳

Something like this happens if lauching the installer directly from Firefox after download. Try running downloaded exe from windows explorer.

I am downloading and importing that one as well. I went back and looked though it and you are right, the AP-TC-MIB says it has them but it really doesn't. I will work this out with Cisco. Thank you for catching that.

Hello What would be the easiest solution to implement simple parent configuration? For example show node status as unknown when parent is down. It works with some devices but not all of them. For example Ubiquiti links and mikrotik devices wount show that, or if there is some managed switch thats not fully supported. Egert