Agent upgrade from 1.2.10 to 1.2.12
-
After upgrading my agent from 1.2.10 to 1.2.12 I get a buffer overflow when trying to start the service.
Here's the error...
[root@netxms ~]# service nxagentd start Starting nxagentd: *** buffer overflow detected ***: nxagentd terminated ======= Backtrace: ========= /lib64/libc.so.6(__fortify_fail+0x37)[0x385cf02827] /lib64/libc.so.6[0x385cf00710] /lib64/libc.so.6[0x385cf00d5b] nxagentd[0x40dff6] /lib64/libc.so.6(__libc_start_main+0xfd)[0x385ce1ed1d] nxagentd[0x404cc9] ======= Memory map: ======== 00400000-0041a000 r-xp 00000000 fd:00 392307 /usr/bin/nxagentd 0061a000-00622000 rw-p 0001a000 fd:00 392307 /usr/bin/nxagentd 01732000-01753000 rw-p 00000000 00:00 0 [heap] 3434400000-34345b5000 r-xp 00000000 fd:00 398524 /usr/lib64/libcrypto.so.1.0.1e 34345b5000-34347b5000 ---p 001b5000 fd:00 398524 /usr/lib64/libcrypto.so.1.0.1e 34347b5000-34347d0000 r--p 001b5000 fd:00 398524 /usr/lib64/libcrypto.so.1.0.1e 34347d0000-34347dc000 rw-p 001d0000 fd:00 398524 /usr/lib64/libcrypto.so.1.0.1e 34347dc000-34347e0000 rw-p 00000000 00:00 0 385ca00000-385ca20000 r-xp 00000000 fd:00 260791 /lib64/ld-2.12.so 385cc1f000-385cc20000 r--p 0001f000 fd:00 260791 /lib64/ld-2.12.so 385cc20000-385cc21000 rw-p 00020000 fd:00 260791 /lib64/ld-2.12.so 385cc21000-385cc22000 rw-p 00000000 00:00 0 385ce00000-385cf8b000 r-xp 00000000 fd:00 260814 /lib64/libc-2.12.so 385cf8b000-385d18a000 ---p 0018b000 fd:00 260814 /lib64/libc-2.12.so 385d18a000-385d18e000 r--p 0018a000 fd:00 260814 /lib64/libc-2.12.so 385d18e000-385d18f000 rw-p 0018e000 fd:00 260814 /lib64/libc-2.12.so 385d18f000-385d194000 rw-p 00000000 00:00 0 385d200000-385d202000 r-xp 00000000 fd:00 260724 /lib64/libdl-2.12.so 385d202000-385d402000 ---p 00002000 fd:00 260724 /lib64/libdl-2.12.so 385d402000-385d403000 r--p 00002000 fd:00 260724 /lib64/libdl-2.12.so 385d403000-385d404000 rw-p 00003000 fd:00 260724 /lib64/libdl-2.12.so 385d600000-385d617000 r-xp 00000000 fd:00 260815 /lib64/libpthread-2.12.so 385d617000-385d817000 ---p 00017000 fd:00 260815 /lib64/libpthread-2.12.so 385d817000-385d818000 r--p 00017000 fd:00 260815 /lib64/libpthread-2.12.so 385d818000-385d819000 rw-p 00018000 fd:00 260815 /lib64/libpthread-2.12.so 385d819000-385d81d000 rw-p 00000000 00:00 0 385da00000-385da15000 r-xp 00000000 fd:00 260837 /lib64/libz.so.1.2.3 385da15000-385dc14000 ---p 00015000 fd:00 260837 /lib64/libz.so.1.2.3 385dc14000-385dc15000 r--p 00014000 fd:00 260837 /lib64/libz.so.1.2.3 385dc15000-385dc16000 rw-p 00015000 fd:00 260837 /lib64/libz.so.1.2.3 385de00000-385dee8000 r-xp 00000000 fd:00 397701 /usr/lib64/libstdc++.so.6.0.13 385dee8000-385e0e8000 ---p 000e8000 fd:00 397701 /usr/lib64/libstdc++.so.6.0.13 385e0e8000-385e0ef000 r--p 000e8000 fd:00 397701 /usr/lib64/libstdc++.so.6.0.13 385e0ef000-385e0f1000 rw-p 000ef000 fd:00 397701 /usr/lib64/libstdc++.so.6.0.13 385e0f1000-385e106000 rw-p 00000000 00:00 0 385e200000-385e283000 r-xp 00000000 fd:00 260821 /lib64/libm-2.12.so 385e283000-385e482000 ---p 00083000 fd:00 260821 /lib64/libm-2.12.so 385e482000-385e483000 r--p 00082000 fd:00 260821 /lib64/libm-2.12.so 385e483000-385e484000 rw-p 00083000 fd:00 260821 /lib64/libm-2.12.so 385ee00000-385ee16000 r-xp 00000000 fd:00 260722 /lib64/libresolv-2.12.so 385ee16000-385f016000 ---p 00016000 fd:00 260722 /lib64/libresolv-2.12.so 385f016000-385f017000 r--p 00016000 fd:00 260722 /lib64/libresolv-2.12.so 385f017000-385f018000 rw-p 00017000 fd:00 260722 /lib64/libresolv-2.12.so 385f018000-385f01a000 rw-p 00000000 00:00 0 385f600000-385f616000 r-xp 00000000 fd:00 260824 /lib64/libgcc_s-4.4.7-20120601.so.1 385f616000-385f815000 ---p 00016000 fd:00 260824 /lib64/libgcc_s-4.4.7-20120601.so.1 385f815000-385f816000 rw-p 00015000 fd:00 260824 /lib64/libgcc_s-4.4.7-20120601.so.1 385fa00000-385fa26000 r-xp 00000000 fd:00 265021 /lib64/libexpat.so.1.5.2 385fa26000-385fc25000 ---p 00026000 fd:00 265021 /lib64/libexpat.so.1.5.2 385fc25000-385fc28000 rw-p 00025000 fd:00 265021 /lib64/libexpat.so.1.5.2 3a92c00000-3a92c0f000 r-xp 00000000 fd:00 392585 /usr/lib64/libnxtre.so.5.0.0 3a92c0f000-3a92e0e000 ---p 0000f000 fd:00 392585 /usr/lib64/libnxtre.so.5.0.0 3a92e0e000-3a92e0f000 rw-p 0000e000 fd:00 392585 /usr/lib64/libnxtre.so.5.0.0 3a93000000-3a93031000 r-xp 00000000 fd:00 392655 /usr/lib64/libnetxms.so.1.0.0 3a93031000-3a93231000 ---p 00031000 fd:00 392655 /usr/lib64/libnetxms.so.1.0.0 3a93231000-3a93233000 rw-p 00031000 fd:00 392655 /usr/lib64/libnetxms.so.1.0.0 3a93233000-3a93237000 rw-p 00000000 00:00 0 3a93c00000-3a93c0b000 r-xp 00000000 fd:00 399141 /usr/lib64/libnxdb.so.1.0.0 3a93c0b000-3a93e0b000 ---p 0000b000 fd:00 399141 /usr/lib64/libnxdb.so.1.0.0 3a93e0b000-3a93e0c000 rw-p 0000b000 fd:00 399141 /usr/lib64/libnxdb.so.1.0.0 7fc288935000-7fc28893e000 rw-p 00000000 00:00 0 7fc28893e000-7fc288941000 r-xp 00000000 fd:00 395787 /usr/lib64/libappagent.so.1.0.0 7fc288941000-7fc288b40000 ---p 00003000 fd:00 395787 /usr/lib64/libappagent.so.1.0.0 7fc288b40000-7fc288b41000 rw-p 00002000 fd:00 395787 /usr/lib64/libappagent.so.1.0.0 7fc288b49000-7fc288b4b000 rw-p 00000000 00:00 0 7fff8b06e000-7fff8b083000 rw-p 00000000 00:00 0 [stack] 7fff8b1b2000-7fff8b1b3000 r-xp 00000000 00:00 0 [vdso] ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall] /bin/bash: line 1: 4241 Aborted (core dumped) nxagentd -d [FAILED] [root@netxms ~]#And the config file
[root@netxms ~]# cat /etc/nxagentd.conf # # Sample configuration file for NetXMS agent # # # Servers # # List of management servers which have read access to this agent. # Both IP addresses and DNS names can be used. Multiple servers can be # specified in one line, separated by commas. If this parameter used more # than once, servers listed in all occurences will have access to agent. # # Examples: # Servers = 10.0.0.1 # Servers = 127.0.0.1, srv1.domain.com, srv2.domain.com Servers = localhost # # ControlServers # # List of management servers which can execute actions on agent. Hosts # listed in this parameter also have read access to the agent. Both # IP addresses and DNS names can be used. Multiple servers can be specified # in one line, separated by commas. If this parameter used more than # once, servers listed in all occurences will have access to agent. # # Examples: # ControlServers = 10.0.0.1 # ControlServers = 127.0.0.1, srv1.domain.com, srv2.domain.com ControlServers = localhost # # MasterServers # # List of management servers which have full access to agent. Hosts listed # in this group can change agent's config, upload files to agent and initiate # agent upgrade, as well as perform any task allowed for hosts listed in # Servers and ControlServers. Both IP addresses and DNS names can be used. # Multiple servers can be specified in one line, separated by commas. # If this parameter used more than once, servers listed in all occurences # will have access to agent. # # Examples: # MasterServers = 10.0.0.1 # MasterServers = 127.0.0.1, srv1.domain.com, srv2.domain.com MasterServers = localhost # # ListenPort # # Defines the port number for the agent to listen on incoming connections. # Default values is 4700 # # Examples: # ListenPort = 4700 # # LogFile # # Agent's log file. To write log to syslog (or Event Log on Windows), # use {syslog} as file name. # # Examples: LogFile = {syslog} # LogFile = /var/log/nxagentd.log # # RequireAuthentication # # If set to "yes", host connected to agent have to provide correct shared # secret before issuing any command. Default value is "no". # # Example: # RequireAuthentication = no RequireAuthentication = yes # # RequireEncryption # # If set to "yes", host connected to agent will be forced to use encryption, # and if encryption is not supported by remote host, connection will be # dropped. Default value is "no". This parameter has no effect if agent # was compiled without encryption support. # # Example: # RequireEncryption = no RequireEncryption = yes # # EnabledCiphers # # Control what ciphers agent can use for connection encryption. Value for # this parameter is a cipher code. To enable more than one cipher, they # codes should be added. By default, all possible ciphers are enabled. # # Possible cipher codes: # 1 = AES-256 # 2 = BLOWFISH # 4 = IDEA # 8 = Triple DES # # Example (enable AES-256 and IDEA): # EnabledCiphers = 5 # # SharedSecret # # Agent's shared secret. Used only if RequireAuthentication set to "yes". # # Example: # SharedSecret = secret SharedSecret = xxxxxxxx # # MaxSessions # # Maximum number of simultaneous communication sessions. Possible value can # be in range from 2 to 1024. Default value is 32. # # Example: # MaxSessions = 32 # # SessionIdleTimeout # # Communication session's idle timeout in seconds. If agent will not receive # any command from peer within specified timeout, session will be closed. # Default value is 60 seconds. # # Example: # SessionIdleTimeout = 60 # # FileStore # # Directory to be used for storing files uploaded by installation server(s). # # Example: # FileStore = /var/lib/netxms # # TimeOut # # GET request timeout in seconds. If GET request cannot be completed for # specified amount of time, agent will return an error to server. # Default value is 5 seconds. # # Example: # TimeOut = 5 # # StartupDelay # # Number of seconds agent should wait on startup before start servicing # requests. This parameter can be useful to prevent false reports about # missing processes or failed services just after monitored system startup. # Default value is 0, i.e. no startup delay. # # Example: # StartupDelay = 0 # # PlatformSuffix # # String to be added as suffix to value of System.PlatformName parameter. # # Example: # PlatformSuffix = dbg # # EnableSubagentAutoload # # Enable or disable autoloading of platform subagent(s). # Default value is "yes". # # Example: # EnableSubagentAutoload = yes # # EnableProxy # # Allow requests forwarding # Default value is "no" # # Example: # EnableProxy = no # # EnableSNMPProxy # # Allow SNMP requests forwarding # Default value is "no" # # Example: # EnableSNMPProxy = no # # SubAgent # # Subagent to load. To load multiple subagents, you should use multiple # SubAgent parameters. Subagents will be loaded in the same order as they # appears in configuration file. # # UNIX example: # SubAgent = [path_to_netxms_install_dir]/lib/libnsm_linux.so # # Windows example: # SubAgent = winperf.nsm SubAgent = /usr/lib64/libnsm_ecs.so SubAgent = /usr/lib64/libnsm_linux.so SubAgent = /usr/lib64/libnsm_logwatch.so SubAgent = /usr/lib64/libnsm_odbcquery.so SubAgent = /usr/lib64/libnsm_ping.so SubAgent = /usr/lib64/libnsm_portcheck.so SubAgent = /usr/lib64/libnsm_sms.so #SubAgent = /usr/lib64/libnsm_ups.so # # ExternalParameter # # Add parameter handled by external command. To add multiple parameters, you # should use multiple ExternalParameter entries. Please note that on Windows # agent uses system process execution API for execution of specified # command, so you cannot use pipes or shell commands. If you need to # execute command via shell, use ExternalParameterShellExec instead. # # Syntax: # ExternalParameter = <parameter_name>:<command_line> # If you specify parameter name as "name(*)", then you can use $1 .. $9 in # command line to substitute actual arguments passed from server. # # Examples: # ExternalParameter = Test:echo test # ExternalParameter = LineCount(*):cat $1 | wc -l # ExternalParameter = Test2(*):myprog $1 $2 # # ExternalParameterShellExec # # Add parameter handled by external command. To add multiple parameters, you # should use multiple ExternalParameterShellExec entries. This is similar # to ExternalParameter with exception that agent will use shell to execute # specified command instead of system process exeution API. This difference # presented only on Windows system, on other systems ExternalParameter and # ExternalParameterShellExec behaves identically. # # Syntax: # ExternalParameterShellExec = <parameter_name>:<command_line> # If you specify parameter name as "name(*)", then you can use $1 .. $9 in # command line to substitute actual arguments passed from server. # # Examples: # ExternalParameterShellExec = Test:dir c:\ | wc -l ConfigIncludeDir = /etc/nxagentd.conf.d *PING Timeout = 1000 PacketRate = 30 Target = 24.96.198.137:Col-ISP Target = 172.16.5.1:Atl-FW Target = 172.16.30.1:QTS-FW [root@netxms ~]# -
Hi!
As it looks like you have core file from the crash, can you please send me backtrace obtained with gdb. Instruction is following:
- Run gdb as
gdb /usr/bin/nxagentd core
(replace core with actual core file location)
- At (gdb) prompt, enter command bt
Best regards,
Victor -
[root@netxms ~]# cat /proc/sys/kernel/core_pattern
|/usr/libexec/abrt-hook-ccpp %s %c %p %u %g %t e
[root@netxms ~]# cd /var/cache/abrt-di/
[root@netxms abrt-di]# ls -la
total 8
drwxrwxr-x. 2 abrt abrt 4096 Nov 22 16:45 .
drwxr-xr-x. 11 root root 4096 Feb 23 13:07 ..
[root@netxms abrt-di]#What's the best way to get the core file? can i just echo "<file location>" > /proc/sys/kernel/core_pattern ?
-
-
Can you please also run agent as
nxagentd -D9
and end me the output?
Best regards,
Victor -
same result, output attached
EDIT: i guess it would help if i saved the file before attaching it
-
Looks like it's crashed even before agent completes initialization. Can you try to set log file to a file instead of syslog? Also, on what system you are running it?
Best regards,
Victor -
I set logging to go to /var/log/nxagentd.log and tried running it with the -D9 option again, but i'm running it as root and the log file still doesn't exist
[root@netxms ~]# cat /etc/redhat-release
CentOS release 6.5 (Final)
[root@netxms ~]# uname -a
Linux netxms.x.x 2.6.32-431.5.1.el6.centos.plus.x86_64 #1 SMP Tue Feb 11 21:21:23 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux
[root@netxms ~]# -
Don't have CentOS 6.5 for testing at the moment, will try it tomorrow. How did you build agent (with what configure options)?
Best regards,
Victor -
configure
--with-server
--with-snmp
--with-mysql
--with-pgsql
--with-sqlite
--with-odbc
--with-client
--with-agent -
Hi!
Try to add --disable-xmpp just in case.
Best regards,
Victor -
Ok, i'm building now. I was under the impression it was just the server that used the XMPP library?
EDIT: Same result
-
-
-
Hi!
I've fixed the problem. Version 1.2.13 will work correctly.
Best regards,
Victor -
I don't know if this might warrant a new thread, but i'm having the same (or appears the same) issue when trying to install 1.2.13 agents. I ran it with strace, thought it might help, the output is attached.
-
Sorry, due to mistake fix for this bug didn't get to release. I'll repack source code package with fix included. I can also repack deb packages if someone uses them on Ubuntu.
Best regards,
Victor -
Update: I've repacked source archive - now it should work on Ubuntu.
Best regards,
Victor -
-
Seems to be different issue. Could you please run it under gdb and send me stack trace?
Best regards,
Victor
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login