Retrieve Mikrotik Wireless Registration Table by SNMP
-
Hi!
We're new using netxms and we're trying to using it to monitor about 3000 Mikrotik devices using snmp. So, i'm doing some test to see if it's usable for our enviorement. I imported Mikrotik MIB and create some nodes on netxms. I can get SNMP values such number of wireless clients connected to an access point, temperature, throughput per interface... IT'S COOL!.
The last thing i need to configure is retrieve a table of wireless clients from an Access Point. On this table, Mikrotik show some values of each wireless client such MAC address, remote radio name, RouterOS version, signal strength... I tried to configure following this steps:
- On AP node, right click and select "Data Collecion Configuration"
- Right click and select "New Table"
- On "General", set a name to this probe, set "Origin" as SNMP, and, on Parameter, set to .1.3.6.1.4.1.14988.1.1.1.2.1.
- If i click on "Select" and then on "Walk", i can see all table.
- Set probe interval on 5 sec.
- Add a new column, for example to get RouterOS version. I think that is on this step where i have the problem. I set "Name" and "Display Name" to ROS. Data type is set to same data type that snmp walk tells me "RouterOS" column is (String). "Aggregation function" is set to default "SUM" and below checkboxes are not checked. SNMP Object ID is set to .1.3.6.1.4.1.14988.1.1.1.2.1.10 and is verified by snmp walk.
- After some time, i tried to view table values, but the only thing i can see are the columns i defined, but without any value.
On logs, i don't see any error.
What i'm doing wrong?
Thank you!
-
-
-
-
-
-
-
Hi!
All steps you do are correct. Can you please post screenshot of your table configuration? Also, is it possible to provide me with SNMP access to some test Mikrotik device so I can test if there are any bug withing NetXMS?
Best regards,
Victor -
-
-
Note about Mikrotik support — it's already implemented and will be included in upcoming 1.2.14
-
I just realize that SNMP table was not working because you have to provide one of table OIDs to collect instances. If you change table OID to .1.3.6.1.4.1.14988.1.1.1.2.1 it should work. It is not very convenient nor straight forward, I know
SNMP tables definitely need improvement.Best regards,
Victor -
@dmartl said in Retrieve Mikrotik Wireless Registration Table by SNMP:
Hi Victor,
I send you a private message with all data you need to get access to the lab.
Thank you.
Cooool!!!
I downloaded new version and it works like a charm. The driver apears to be a very earlier version, because in wireless clients doesn't show wireless strenght, ccq, and other values that mikrotik provides in registration table.
So, i'll try to modify driver source to add this values. if i have any improvement, i'll post here.
Thank you very much.
-
Hello:
I have the same problem, have a registration table completelly blank... but my <nxadm -c "sh po" | grep -v 'wait'> commnad, tell's:
PT TIME STATE
A 30/Oct/2015 11:37:39 checkWhat is the key columnt in the table? I have mark iface and addrs (.1 and .2).
Thnx.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login