SYS_IF
-
Hello. I would like to share experiences SYS_IF_DOWN SYS_IF_DISABLED SYS_IF_UP.
On the switch port can not be ip addresses, and therefore I do not want there to see these macros: IP Addr: %3/%4
I created a new event's - SYS_IF_DOWN_DLINK SYS_IF_DISABLED_DLINK and he did it so: Interface "%2" changed state to DOWN (IfIndex: %5)Then I applied them on filters in the EPP, but still trigger major developments in spite of that, I can implement my logic?
That is, for a certain container switches I want to receive event's SYS_IF_DOWN_DLINK SYS_IF_DISABLED_DLINK and etc, and for everyone else, servers and ports on the routers I need major events SYS_IF_DOWN SYS_IF_DISABLED SYS_IF_UP
Рow is that possible to do?
-
Hi,
SYS_IF_DOWN and SYS_IF_UP events are pre-defined and system will generate exactly these events. But you can change text for any system event, so it could be simplest solution.
Best regards,
Victor -
Hi,
SYS_IF_DOWN and SYS_IF_UP events are pre-defined and system will generate exactly these events. But you can change text for any system event, so it could be simplest solution.
Best regards,
VictorI solved the problem by modifying the alarm text in the EPP - alarm - message - Interface "%2" change state to disabled (IfIndex: %5) and pointed in the right sources of container, and for everyone else left the normal message %m
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login