MikroTik switches are not discovered
-
Hello all,
as I'm newly trying out NetXMS this is maybe a basic question.
Setup:
Using the latest version of NetXMS, downloaded yesterday.
We've a local, internal network of PCs which are connected by MikroTik switches (CRS212 and CRS317) and on which SNMP is enabled.
The switches have assigned IP addresses which are in a DIFFERENT subnet than the PCs, i.e. the PC are all reachable by ping from the PC subnet and the switches not (as intended).
Using the Ubuntu command line commands "lldpctl" or "cdpr" for neighbor discovery detects all switches. The same applies for the "arp-scan" command.The NetXMS server is in the subnet of the PCs and autodiscovery only yields the nodes in the same subnet.
I've added then all switches manually, but NetXMS is not able to get any info from the MikroTik switches.What needs to be done, that NetXMS discovers also these switches ? (except putting them in the same subnet as the PCs)
Thanks for your answers
Oliver
-
Being able to detect the switches with Layer 2 protocols like LLDP or CDP does not mean NetXMS can connect to them using SNMP.
If you wish to poll SNMP data on the Microtik switches, the NetXMS server (or a proxy) needs to be able to access the switches IP addresses via SNMP. That means routing must work and any firewall in between must allow that traffic. If you do not want to allow any traffic from your computer into your management network, you can place a single system into the management network, install a NetXMS agent and have it connect back to the NetXMS server using Agent Tunnels, which means the connection will be established from the management network outbound, not the other way around. That system can then be your proxy for the management network and poll all the switches.
However, if all you care about is the data presented to you by using LLDP or CDP, you can create an ExternalParameter on a computer of your choice to run those tools and format the data so that NetXMS can read it.
-
Hello Tursiops,
thanks for your explanations/clarifications. I wanted to be sure not to have overlooked some options in NetXMS for discovery of switches/routers.
So I changed routing such that the MikroTik devices are found and now they are discovered by NetXMS.
Thanks and best regards
Oliver
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login