Cisco Entity Sensor MIB
-
Has anyone taken the Cisco Entity Sensor MIB and used it to create monitoring and alarms for an IOS-XE device?
I know I take entPhysicalDescr to get the description of what is monitored and then entSensorType for the type of data (volts/celsius/amps) and then entSensorPrecision for the number of decimal places to transform and then entSensorValue for the actual value and then entSensorScale to get the .
These five queries will give me something like:
subslot 0/2 voltage Sensor 4 : 2482 mV DCThen you would use entSensorThresholdSeverity and entSensorThresholdRelation and entSensorThresholdValue to get your alarm parameters. Using the above example, my alarm parameters would be:
greater than 4875 mV = minor alarm
greater than 5125 mV = critical alarm
less than 125 mV = minor alarm
less than -125 mV = critical alarmSo, right now I would have no alarm for subslot 0/2 voltage Sensor 4.
Has this been done? What's the best way to set this up if it hasn't been done?
Thanks in advance!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login