ibm blade center
-
Hi!
I suspect that NetXMS server incorrectly process some information obtained from device. Could you please send me more information about this object(s)? I'm mostly interested in information shown on summary page (capabilities, OID, system description), list of interfaces with IP addresses, and IP address selected as primary. I don't need to know exact IP addresses, but very important is to check that address selected as primary IP is presented on one of interface objects.
Best regards,
Victor -
hi victor,
i will give you the info.
b.t.w i use the network discovery on all the time and server keeps adding the same ip of the management module again and again.
instead of one node per management module i have like 25Best Regards and good to be back,
Lindeamon -
hi victor,
i have attached 2 screenshots of the fibre channel module that is the problematic one.
Best Regards,
Lindeamon
-
Hi!
Can you confirm that IP address 172.16.4.41 presented on one of the interfaces of the node?
Best regards,
Victor -
hi victor,
those ip address are belong to the fiber channel modules of the blade center.
the cage has 2 options for networking:- the management port.
- the network module ports.
every module has it's own ip address so it could be configured but i do not know from which network capable module i connect to the management of the modules.
Best Regards,
Lindeamon -
hi victor,
i have done a little research and what i have found out that by default the communication to the fiber-channel module is made through the management module.
every module in the cage has it's own ip address.
what i have experiencing is that every period of time both of the fiber channel modules are being rediscovered and for some reason the server can not place them under the subnet tree.hope this help you solve the problem.
Best Regards,
Lindeamon -
Hi!
I have some ideas why this can happen. I do some fixes already, next release will contain them. Hopefully it will help.
Best regards,
Victor -
-
Hi!
I hope that it will be before end of March, but I have planned quite a lot for this release, so maybe it will be delayed till first half of April, depending on how fast I'll be able to do development.
Best regards,
Victor -
-
hi victor,
i have upgraded the server and all to 1.2.0 and from first impression i can see that it does not re-detect the hba modules but it does not place them under the subnet container in the "entire network" tree.
i will wait until tomorrow to see if the hba's are being rediscovered and will keep you posted.Best Regards,
Lindeamon -
hi victor,
now i can say for sure that the hba modules are not redetected but thay are not placed under the correct place in the subnet tree.
i can tell you that in the ibm blade center there are 2 management modules and the hba modules management interface is routed through them meaning that if the management module is down there will be no network connectivity to the hba module.Best Regards,
Lindeamon -
Hi!
Can you please show me all interfaces under hba module with IP addresses and primary IP address of HBA module? I suspect that module's primary address is not visible on any of it's interfaces, and this is why NetXMS server doen not place them into subnet tree.
Best regards,
Victor -
-
hi victor,
i have attached 3 screen shots of the FC module.basically "bay x" means the number of the blade and "ext x" means the ports connected to a san storage or switch.
it has a management or sup interface that holds it's ip but the communication to the module is routed through the blade management module which have a different ip, in this case is 172.16.4.60Best Regards,
Lindeamon
-
hi victor,
i do not know where you stand on this issue but i just want to update you that apparently the fc modules are discovered and in former version they where located under "business.."Â but now i do not even see them and get alarm for them.
Best Regards,
Lindeamon -
-
Are you 100% sure that they are nowhere in the tree? Try to do IP address filter in object tree - enter > followed by IP address in filter field.
Best regards,
Victor -
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login