Bandwidth monitoring with snmp
-
-
This really should be all just part of the standard SNMP Mib for interfaces which NetXMS handles. I don't have any Juniper, but I know all of our other routers / switches had all of their interfaces detected by the software. Just right click on the interface you are interested in from the console and select "Create Data Collection Items". Will allow bytes, packets and errors to be easily collected/graphed.
If you need more than those items inside the Mib itself you can get much more if needed for some reason like unicast/broadcast/multicast traffic counters, discards, ... One starting place (.1.3.6.1.2.1.2.2.1) for this. Also the ifXTable for 64 bit counters which I would suspect your Juniper supports. See the RFC for details (http://www.ietf.org/rfc/rfc2233.txt).
Hope this helps.
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login