Raspberry Pi

[victor]

How did you compile agent for Pi? Can you send me config.h from your build? I suspect wrong byte order detection.

Best regards,
Victor

[nihplod]

tried
sudo sh configure --with-agent
and
sudo sh configure --with-agent --libdir=/usr/lib

Cause there was first some lib errors, but that was solved with the libdir i think. I also moved all the libs to /usr/lib that was for nxagent first compile also cause it wasn't looking in /usr/local/lib apparently.

attached config.h, the output from configure, the output from make and the output from make install

---

config.h

configure.txt

make.txt

make.install.txt

[nihplod]

Any idea about what i could do about this?

[victor]

You can try to rebuild agent with --disable-iconv option. If this will not help, can you consider giving me shell access to it so I can debug the issue?

Best regards,
Victor

[nihplod]

I tried to rebuild it with that flag but it seems i have the same issue.

I sent you logindata and stuff for the unit.
Just use sudo for root stuff. Dont break the small baby

[victor]

Hi!

Just try to connect to agent via ssh port forwarding - it responds correctly. I see in your config that you turn on authentication on agent - but do you enter correct authentication parameters in node properties? Currently everything is correct in my test:

C:\Source\NetXMS\x64\debug>nxget -e 0 -p 4444 -a sha1 -s <secret> 127.0.0.1 Agent.Version
1.2.1

and on the agent:

[31-Jul-2012 19:16:26] Incoming connection from 127.0.0.1
[31-Jul-2012 19:16:26] Connection from 127.0.0.1 accepted
[31-Jul-2012 19:16:26] [session:0] Received control message CMD_GET_NXCP_CAPS
[31-Jul-2012 19:16:26] [session:0] Sending message CMD_NXCP_CAPS (size 16)
[31-Jul-2012 19:16:26] [session:0] Received message CMD_AUTHENTICATE
[31-Jul-2012 19:16:26] [session:0] Sending message CMD_REQUEST_COMPLETED (size 32)
[31-Jul-2012 19:16:26] [session:0] Received message CMD_KEEPALIVE
[31-Jul-2012 19:16:26] [session:0] Sending message CMD_REQUEST_COMPLETED (size 32)
[31-Jul-2012 19:16:26] [session:0] Received message CMD_GET_PARAMETER
[31-Jul-2012 19:16:26] [session:0] Requesting parameter "Agent.Version"
[31-Jul-2012 19:16:26] [session:0] GetParameterValue(): result is 0 (SUCCESS)
[31-Jul-2012 19:16:26] [session:0] Sending message CMD_REQUEST_COMPLETED (size 56)
[31-Jul-2012 19:16:26] [session:0] Session with 127.0.0.1 closed

Best regards,
Victor

[nihplod]

Yeah, it seems that it wont work when i have authentication running.
I have the same configuration as the other nodes and it will just halt when doing a poll, but if i comment out the authentication it will work. And i am using the very same settings that i've done for the other nodes that has working auth.

Thanks for the help tho

[victor]

Can you show me screenshot of authentication properties in console for this node? nxget works fine with authentication, so server should also work.

Best regards,
Victor

[nihplod]

I have tried with None, Plain text, md5 and sha1. But when i remove encryption from configuration file and restarts it works properly.

This is the result when i try accessing with the client using any setting when having force encryption activated on the node

[01-Aug-2012 09:12:21] Connection from 10.0.0.18 accepted
[01-Aug-2012 09:12:21] [session:0] Received control message CMD_GET_NXCP_CAPS
[01-Aug-2012 09:12:21] [session:0] Sending message CMD_NXCP_CAPS (size 16)
[01-Aug-2012 09:12:21] [session:0] Received message CMD_AUTHENTICATE
[01-Aug-2012 09:12:21] [session:0] Sending message CMD_REQUEST_COMPLETED (size 32)
[01-Aug-2012 09:12:21] [session:0] Received message CMD_REQUEST_SESSION_KEY
[01-Aug-2012 09:12:21] [session:0] Sending message CMD_SESSION_KEY (size 32)
[01-Aug-2012 09:12:21] [session:0] Session with 10.0.0.18 closed

---

[victor]

But do you build agent with encryption enabled? I remember that on some stage of debugging you was rebuilding it without encryption.

[nihplod]

It is built with --disable-iconv now, that is the only disable i have. Encryption isn't that important for me on my own private network at home. I can communicate with the node so it's not an issue now ^^