network discovery
-
hi,
i have installed netxms on a computer with ip 10.33.9.5 and i wanted it to discover computers on other subnets 10.61.1-5.0/24
i have configured the network discovery to discover using active and passive and on the active networks to find i configured the above mentioned 5 subnets.i have to say that i can reach those subnets only by ping with no snmp ability to any node and all i want to monitor is alive/not alive.
did i configured it correctly ? when i configure specific network on active discovery,does that mean that it will try to ping all the addresses on the given subnet and add what it finds or it will try and find those subnets only if it finds them in the arp and route database?Lindeamon
-
Hi!
Active discovery means that system will ping each address in given subnet(s) and add each which responds (if node passes discovery filters).
Best regards,
Victor -
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login