Possible bug in Object Tools - SNMP Table

[Beda]

Hi,
first, I want to sorry for my English.

I have a following problem:
In Object Tools I have created a new tool of type "SNMP Table".
It was identical to the tool "&Info->&Routing table (SNMP)" except for table columns.
After running that tool, displayed table was empty although I could see content of the table
in a MIB Browser.

I could replicate this problem by removing 4 columns from "&Info->&Routing table (SNMP)".
When one column (Metric) left, the table stayed empty.

I can't see actual status of a SNMP communication, so I don't know if SNMP request failed
or if another error occured (some progress bar would be a helpful feature).

I am using NetXMS 1.2.1 running on Windows 7.

Is it a bug or am I missing something?

        Beda

[victor]

Hi!

What is setting for index column?

Best regards,
Victor

[Beda]

Thank you for your quick answer.

"OID suffix of first column" is used as index for second and subsequent columns.

    Beda

[Beda]

Hi,
after upgrading to 1.2.3 the problem unfortunatelly still remains.

In a MIB browser I can see following data when walking .1.3.6.1.4.1.17607.5.1

.1.3.6.1.4.1.17607.5.1.1.2.1 [STRING] = 2012-07-12 11:44:44
.1.3.6.1.4.1.17607.5.1.1.2.2 [STRING] = 2012-07-17 09:40:49
.1.3.6.1.4.1.17607.5.1.1.2.3 [STRING] = 2012-07-17 09:40:49
.1.3.6.1.4.1.17607.5.1.1.2.4 [STRING] = 2012-07-17 09:40:49
.1.3.6.1.4.1.17607.5.1.1.2.5 [STRING] = 2012-08-14 16:05:45
.1.3.6.1.4.1.17607.5.1.1.3.1 [STRING] = CTI-Avaya:1
.1.3.6.1.4.1.17607.5.1.1.3.2 [STRING] = Screen:1
.1.3.6.1.4.1.17607.5.1.1.3.3 [STRING] = watchdog:1
.1.3.6.1.4.1.17607.5.1.1.3.4 [STRING] = CTI-Avaya:1
.1.3.6.1.4.1.17607.5.1.1.3.5 [STRING] = :0
.1.3.6.1.4.1.17607.5.1.1.4.1 [INTEGER] = 2
.1.3.6.1.4.1.17607.5.1.1.4.2 [INTEGER] = 2
.1.3.6.1.4.1.17607.5.1.1.4.3 [INTEGER] = 2
.1.3.6.1.4.1.17607.5.1.1.4.4 [INTEGER] = 2
.1.3.6.1.4.1.17607.5.1.1.4.5 [INTEGER] = 2
.1.3.6.1.4.1.17607.5.1.1.5.1 [STRING] = 104
.1.3.6.1.4.1.17607.5.1.1.5.2 [STRING] = Failure of service
.1.3.6.1.4.1.17607.5.1.1.5.3 [STRING] = Failure of service
.1.3.6.1.4.1.17607.5.1.1.5.4 [STRING] = Failure of service
.1.3.6.1.4.1.17607.5.1.1.5.5 [STRING] = Failure of service
.1.3.6.1.4.1.17607.5.1.1.6.1 [INTEGER] = 1
.1.3.6.1.4.1.17607.5.1.1.6.2 [INTEGER] = 1
.1.3.6.1.4.1.17607.5.1.1.6.3 [INTEGER] = 1
.1.3.6.1.4.1.17607.5.1.1.6.4 [INTEGER] = 1
.1.3.6.1.4.1.17607.5.1.1.6.5 [INTEGER] = 1
.1.3.6.1.4.1.17607.5.1.1.7.1 [INTEGER] = 0
.1.3.6.1.4.1.17607.5.1.1.7.2 [INTEGER] = 0
.1.3.6.1.4.1.17607.5.1.1.7.3 [INTEGER] = 0
.1.3.6.1.4.1.17607.5.1.1.7.4 [INTEGER] = 0
.1.3.6.1.4.1.17607.5.1.1.7.5 [INTEGER] = 0
.1.3.6.1.4.1.17607.5.1.1.8.1 [STRING] = 2012-07-12 11:44:44
.1.3.6.1.4.1.17607.5.1.1.8.2 [STRING] = 2012-07-17 09:40:49
.1.3.6.1.4.1.17607.5.1.1.8.3 [STRING] = 2012-07-17 09:40:49
.1.3.6.1.4.1.17607.5.1.1.8.4 [STRING] = 2012-07-17 09:40:49
.1.3.6.1.4.1.17607.5.1.1.8.5 [STRING] = 2012-08-14 16:05:45
.1.3.6.1.4.1.17607.5.1.1.9.1 [INTEGER] = 211807
.1.3.6.1.4.1.17607.5.1.1.9.2 [INTEGER] = 206001
.1.3.6.1.4.1.17607.5.1.1.9.3 [INTEGER] = 206001
.1.3.6.1.4.1.17607.5.1.1.9.4 [INTEGER] = 206001
.1.3.6.1.4.1.17607.5.1.1.9.5 [INTEGER] = 206001

OIDs of my columns:

.1.3.6.1.4.1.17607.5.1.1.2
.1.3.6.1.4.1.17607.5.1.1.3
.1.3.6.1.4.1.17607.5.1.1.4
.1.3.6.1.4.1.17607.5.1.1.5
.1.3.6.1.4.1.17607.5.1.1.6
.1.3.6.1.4.1.17607.5.1.1.7
.1.3.6.1.4.1.17607.5.1.1.8
.1.3.6.1.4.1.17607.5.1.1.9

When I run the tool, created table is empty.

            Beda