Topology Information Missing
-
Was wondering how to get layer 2 topology information for some linux based hardware devices I have (Astaro Firewall, Meru Wifi Controller). SNMP is working on these devices and netxms can poll them but says it cannot get layer 2 topology for those devices. It does see the interfaces for the Astaro Firewall but doesn't see interfaces for the Meru wifi controller. I have loaded the vendor supplied mibs for each device. Any suggestions?
-
NetXMS uses LLDP or CDP information combined with switch forwarding databases to build layer 2 topology. Can you show me overview page for these devices? Also, if there are ethernet switch in between, it is advised to add it to NetXMS as well.
Best regards,
Victor -
I've attached some screen shots of the object details for each -is this what you wanted? (I also included a third device that has the same issue: a Promise Vessraid 1840i). When I view the LLDP, CDP or switch forwarding information, there is nothing for either device. Routing table and Arp cache does show data for the astaro but only arp cache for the meru controller.
The wireless controller is a Meru 1500 controller and the Firewall is an Astaro Security Gateway 220 (now owned by Sophos).
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login