Interface IP's not discovered on F5 BIG-IP
-
Hi,
When I add an F5 BIG-IP node, the IP addresses of the interfaces are not discovered. When I do a walk of .1.3.6.1.2.1.4.20 I can see all the relevant IP's, but they are not discovered automatically by NetXMS. SNMPTraps (which the BIG-IP is originating from a different source IP than the primary IP) are not being registered to the correct object and I can't seem to manually add the IP's to the interfaces.
Is there anything I can tune to force the discovery of the IP's?
Regards,
Richard -
-
There was very similar problem on VMWare ESX which was fixed in 2.0-M1. What NetXMS version you are using?
Best regards,
Victor -
NetXMS version 1.2.17 and SNMP 2c.
I note (and this may not be related) that a walk of .1.3.6.1.2.1.4.20 lists all the IP information, but a walk of .1.3.6.1.2.1.4.34 yields no results. I'm not personally familiar the difference between ipAddrTable and ipAddressTable.
Rich
-
Yes, it's exactly same bug - NetXMS was not read ipAddressTable. After upgrade to 2.0-M1 or newer your problem should be fixed.
Best regards,
Victor -
-
Yes, upgrade procedure is the same - you just run nxdbmgr as usual and it will make necessary changes in DB.
Best regards,
Victor
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login