busy SNMP Agents - Node down / node up alarms in 1 Minute
-
Hi,
we have a problem with busy snmp agents on some switches.
We have some nodes that are changing the status in 1 minute from normal, to down, to normal.
For example:
"20:33:47" "warning" "switch1" "SYS_SNMP_UNREACHABLE" "SNMP agent is not responding"
"20:33:47" "critical" "switch1" "SYS_NODE_DOWN" "Node down"
"20:33:47" "critical" "switch1" "SYS_NODE_CRITICAL" "Node status changed to CRITICAL"
"20:34:50" "normal" "switch1" "SYS_SNMP_OK" "Connectivity with SNMP agent restored"
"20:34:50" "normal" "switch1" "SYS_NODE_UP" "Node up"I think the reason is that our older switches are sometimes heavy loaded at the management interface because we use Kiwi Cat Tools to get the actual mac table and port infos every 30 minutes.
Is there a way to change the retry intervals for snmp connectivity? It would be no problem to receive a error message after 2 minutes instead of 1 minute. Its better than a system that produces 5 or more false error messages a day...
Greetings
Tom -
Hi!
You can only try to increase SNMP request timeout by changing server's configuration variable SNMPRequestTimeout (it's value is in milliseconds). However, I doubt that it will help in your case. I will improve that in the next release.
Best regards,
Victor -
-
-
-
Unfortunately this parameter does not affect SNMP agent status detection. It only affects interface status checks.
Best regards,
Victor -
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
