snmp v3 not working after upgrade to netxms 2.1.2

[amin]

snmp v3 not working after upgrade to netxms 2.1.2

[amin]

old version was 2.0.8 , a snmp v3 was working.

[amin]

this is result of polling:
**** Poll request sent to server ****
 Poll request accepted
 Starting configuration poll for node ROR8_RMSs
 Checking node's capabilities...
    Checking NetXMS agent...
    Checking SNMP...
 Capability check finished
 Checking interface configuration...
 Unable to get interface list from node
 Interface configuration check finished
 Checking node name
 Node name is OK
 Finished configuration poll for node ROR8_RMSs
 Node configuration was not changed after poll
 **** Poll completed successfully ****

[amin]

I make new database with init sql file, and I check with this clean database, problem is same.

[amin]

This is Netxms Debug level 9:
------------------------------------
[DEBUG] ConfPoll(ROR8_RMS): calling SnmpCheckCommSettings()
[DEBUG] SnmpCheckCommSettings(x.x.x.77): starting check (proxy=0, originalPort=161)
[DEBUG] ConfigReadStr: (cached) name=SNMPPorts value="161"
[DEBUG] SnmpCheckCommSettings(x.x.x.77): checking port 161
[DEBUG] SnmpCheckV3CommSettings(x.x.x.77): trying admin1/1:0
[DEBUG] Database Connection Pool: handle 0x80501e520 acquired (call from snmp.cpp:184)
[DEBUG] Successful sync query: "SELECT user_name,auth_method,priv_method,auth_password,priv_password FROM usm_credentials" [0 ms]
[DEBUG] Database Connection Pool: handle 0x80501e520 released
[DEBUG] SnmpCheckV3CommSettings(x.x.x.77): failed
[DEBUG] Database Connection Pool: handle 0x8050ce720 acquired (call from snmp.cpp:322)
[DEBUG] Successful sync query: "SELECT community FROM snmp_communities" [0 ms]
[DEBUG] Database Connection Pool: handle 0x8050ce720 released
----------------------------------------------------------------------------

and this is tcpdump:
-----------------------------
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on vlan2, link-type EN10MB (Ethernet), capture size 262144 bytes
IP x.x.x.29.40290 > x.x.x.77.161:  F=r U= E=  C= GetRequest(11)
IP x.x.x.29.40290 > x.x.x.77.161:  F=ar U=admin1 E= 0x800x000x540xF50x040x450x740x680x650x720x540x650x6B0x430x690x720x630x750x690x740x730x280x430x290x320x300x300x39 C= GetRequest(56)  .1.3.6.1.2.1.1.2.0 .1.3.6.1.2.1.1.1.0 .1.3.6.1.4.1.35160.1.1.0
IP x.x.x.29.40290 > x.x.x.77.161:  GetRequest(56)  .1.3.6.1.2.1.1.2.0 .1.3.6.1.2.1.1.1.0 .1.3.6.1.4.1.35160.1.1.0
IP x.x.x.29.40290 > x.x.x.77.161:  GetRequest(56)  .1.3.6.1.2.1.1.2.0 .1.3.6.1.2.1.1.1.0 .1.3.6.1.4.1.35160.1.1.0
IP x.x.x.29.40290 > x.x.x.77.161:  GetRequest(56)  .1.3.6.1.2.1.1.2.0 .1.3.6.1.2.1.1.1.0 .1.3.6.1.4.1.35160.1.1.0
IP x.x.x.29.40290 > x.x.x.77.161:  GetRequest(56)  .1.3.6.1.2.1.1.2.0 .1.3.6.1.2.1.1.1.0 .1.3.6.1.4.1.35160.1.1.0
IP x.x.x.29.40290 > x.x.x.77.161:  GetRequest(56)  .1.3.6.1.2.1.1.2.0 .1.3.6.1.2.1.1.1.0 .1.3.6.1.4.1.35160.1.1.0
IP x.x.x.29.40290 > x.x.x.77.161:  GetRequest(56)  .1.3.6.1.2.1.1.2.0 .1.3.6.1.2.1.1.1.0 .1.3.6.1.4.1.35160.1.1.0
IP x.x.x.29 > x.x.x.77: ICMP echo request, id 20560, seq 256, length 26
IP x.x.x.29.50664 > x.x.x.77.161:  F=r U= E=  C= GetRequest(11)
IP x.x.x.29.50664 > x.x.x.77.161:  F=ar U=admin1 E= 0x800x000x540xF50x040x450x740x680x650x720x540x650x6B0x430x690x720x630x750x690x740x730x280x430x290x320x300x300x39 C= GetRequest(25)  .1.3.6.1.2.1.1.3.0

[amin]

Already I installed to another Freebsd 11, it is same problem,
this is a bug, please fix it.

so I reinstalled v2.0.8  , it is working now.

[victor]

Hi,

I see that device is not responding to server's requests. What are authentication and encryption algorithms configured on that device?

Best regards,
Victor

[amin]

it is snmp v3,  have username and password with MD5, there is no encryption.

why old version v2.0.8 is working and new version v2.1.2 isn't working on freeBSD v11??