Hypervisor monitoring - How to (help)
-
I would like to receive parameters from ESXi hosts. From the parameters given in the NetXMS documentation I thought it was possible to receive this data from an agent installed on another machine, so I did it as follows:
1 - I installed libvirt on netxms server with ESX driver support
2 - I installed the netxms-agent-vmgr subagent
3 - I set up with the correct sections in agent [vmgr],
SubAgent = vmgr.nsm
[vmgr]
host = myhost
[vmgr: myhost]
Url = esx: // some_user @ ip_server /?no_verify = 1
User = some_user
Password = somepassword
4 - I can access esx host from netxms server from virsh tool.
5 - The agent shows no errors and successfully loads the configuration.The problem is: When I create a DCI with some of the VMGR.xxxxxx metrics, the result is always an error.
Example: VMGR.Host.FreeMemory (myhost) always returns <<ERROR>>Thank you for your help,
-
The issue was resolved by simply updating the configuration pool.
New Issue:
On an ESXi host via esx, the agent can connect and collect data. On a host VCenter, connection through Active Directory user credentials with connection type VPX fails.
The same parameters entered work with the virsh tool.Thank you for your help,
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login