Invalid Subnet Issues
-
The more I use this the more I'm getting frustrated with it!
how do you tell netXMS to ignore the sub-net address?
I use 172.16.X.X with a /24 which seems to cause NetXMS to alarm. I have looked in the EPP rules and cant see anything? How to I turn this off please?
With thanks
-
You can disable this in Configuration->EventProcessingPolicy
#7 Generate alarm when incorrect network mask detected on interface ->Filter->EditConditionCondition->rule is disabled
Events->SYS_INCORRECT_NETMASKWe had the same issue with 10.x.x.0/24. if it finds a single unit with a /8 (or /16 in your case) it creates a subnet in Entire Network (or zone if enabled) that it then matches first.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login