NetXMS gets the wrong address
-
Client System is Windows 2008 using agent 3.3.314
It is a remote system, behind a NAT firewall. The tunnel connects to the server right away, no problem.
But after selecting 'Bind and create node' in the MC, for some reason NetXMS thinks it is on the 192.168.16.0/24 subnet. But it is on a 192.168.50.0/24 subnet.
I have another system there I'm monitoring, and it connected through the tunnel and is being monitored without any problems.
The only thing I can think of is that, on our local lan, the same hostname resolves to a 192.168.16.0/24 address. But NetXMS should not be using our local lan for resolving remote addresses. Also, I did try manually setting the IP address when in 'Bind and connect' but that didn't work.
Because of the wrong IP, after binding, NetXMS can't communicate with the node at all because it has the wrong IP.
Help!
Thanks,
Ted -
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login