Help: H3C port security policy causes the switch to fail to learn the interface
-
We need to locate the IP or mac address quickly, but if we configure a port security policy on the switch interface (as shown in the figure), the mac address status on the switch is "secure" instead of "learned". The problem is that netxms only learns the mac address of the "learned" state ( Switch Forwarding Database ), the mac address of the "security" state seems to be ignored, please ask what is the way to learn all the mac addresses, thank you very much!
-
-
Hi,
could you please share SNMP walk output on .1.3.6.1.2.1.17.7.1.2.2.1?
Best regards,
Victor -
So H3C returns non-standard value 6 for dot1qTpFdbStatus. Interestingly they don't mention this value even in their own documentation on Q-Bridge-MIB (found it here: https://www.h3c.com/en/d_202211/1719268_294551_0.htm).
Can you please explain what is the difference between "secure" and "learned" state? -
-
I've added processing of FDB record status 6 - next patch release should process them in a same way as status 3 (dynamic).
Best regards,
Victor -
-
@victor said in Help: H3C port security policy causes the switch to fail to learn the interface:
I've added processing of FDB record status 6 - next patch release should process them in a same way as status 3 (dynamic).
Best regards,
VictorThe problem has been solved in the just released version 4.3.6, thank you very much!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login