Cisco switch interface speed
-
We have 3 different Cisco switches that are showing a speed of 1k for 1G ports and 100bps for 100M which causes to issues with utilization reporting. I can't find a way to manually change the speed.
Switches with issues are:
SG250-08HP-K9
SNMP object ID=1.3.6.1.4.1.9.6.1.97.8.4SG350-10MP-K9
SNMP object ID=1.3.6.1.4.1.9.6.1.95.10.6SG350X-48MP 48-Port Gigabit PoE Stackable Managed Switch
SNMP object ID=1.3.6.1.4.1.9.6.1.94.48.6We have 1 switch which is fine:
SG300
SRW2008-K9
SNMP object ID=1.3.6.1.4.1.9.6.1.83.10.1Attached are a few screenshots.
Any suggestions on what I can do to fix this?
-
Between OS versions 2.4.0.x and 2.5.5.x the 350 series would report ifSpeed via SNMP in Mbit/s - fixed in 2.5.7.85 and later versions to (correctly) report bit/s.
Note the 'Product version' reported in the NetXMS Node Overview/Inventory is the FW version, which was 2.5.x for the OS versions affected. -
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login